How to Guide

Caradco French Manor Stationary Panel
1. Remove operating panel.
2. For clad:
With putty knife,
pry from one edge
and remove plastic
head closure on
the operating
panelside.
3. Unscrew and
remove head ller
from operating
panel side of
headjamb.
4. Unscrew and
remove stationary
aluminum interlock
from stationary
panel stile.
5. Remove head and
sill Allen head bolts
from stationary
panel brackets.
6. Unscrew and
remove stationary
panel head
ller strip from
stationary panel
side of headjamb.
7. Unscrew and
remove stationary
panel head
bracket.
8. Unscrew and
remove stationary
side ller strip.
9. Unscrew and
remove center
screw only from
each stationary
jamb-to-stile
bracket.
10. Slide panel away
from jamb, press
bottom towards
exterior while
lifting up, then
remove to interior.
11. To reinstall the
panel, perform
these steps in
reverse order.
Siteline and W-2500 Door with Fiberglass Sill StationaryPanel
1. Remove the screen by lifting the screen into the head track and then
swing to the exterior
over the sill track.
2. Remove the screws
along the interior
side of the sill that
secure the stationary
panel to the sill.
3. Remove the two
vertical screws in
the head bracket.
4. Slide panel away
from the jamb.
Remove by lifting
the panel and
swinging the
bottom out to
theexterior.
5. To reinstall the
panel, perform
these steps in reverse order.
Note! Use a hand screwdriver to reinstall screws, power drivers
may strip screws.
Head
ller
Head
closure
Bracket
Head
ller
Side
ller
Frame
Panel
Center
screw
Head
bracket
Attachment
screws
Stationary
panel
Product Guide
Wood Patio Doors (JPG012)
05/19
6
SLIDING/GLIDING PATIO DOOR PANEL REMOVAL AND INSTALLATION - CONTINUED