Dimensions Guide

Architectural Detail Manual
July 2007
JELD-WEN reserves the right to change specifications without notice.
Pa
g
e3-2
PRODUCT SPECIFICATIONS
MATERIALS
Extruded vinyl profiles comply with the performance requirements of
AAMA 303-97. Colors are White and Desert Sand.
FRAME
All frames and sash are assembled utilizing fusion-weldedtechnology
for added strength and durability. Frame jamb depth is 3-9/16”
(90.49mm) and the exterior wall thickness is 0.060 of an inch nominal.
Frame is 4 5/8” (117.48mm) at sill including sill nosing. Frames have
wide profile with 3-1/2” (88.9mm) integral flat casing and come
standard with integral nailing fin that can be easily removed for
replacement purposes.
SASH
Sash is 1-3/8” nominal or 35.18mm thick, and is assembled utilizing
fusion-welded technology for added strength and durability. A steel
reinforcement bar is used in the horizontal working rail of each
operating sash.
GLAZING
3/4” (19mm) insulating glass consists of two lites of glass sealed
around a spacer. All insulating glass units comply w ith the
performance requirements of the IGCC in accordance with either
ASTM E774 or E2190.
GLAZING OPT IONS
3/4” (19mm) insulated glass available in clear, Low-E or Low-E 366,
tinted, obscure, or other specialty insulating glass as specified. All
glass is available tempered.
WEATHER-STRIPPING
Fin-pile weather-strip applied along full perimeter of operating sash.
HARDWARE
Single action cam style lock is available on all windows. Balance
systems are utilized to support the vertical operation of the sash.
Thumb latches (sash retainers) and pivot pins are equipped for
utilization of the ”tilt” function.
INSECT SCREENS
Optional fiberglass charcoal color insect screen in an aluminum frame
to match the color of the unit. Insect screens are intended to allow
air and light in and to keep insects out. They are not intended to keep
anyone or anything from falling through an open door or window.
For safety screens or other security devices contact your local building
supply retailer.
GRILLES
GBG (Grilles between the Glass) - 5/8” (16mm) flat, 7/8” (22.2mm) flat,
5/8” (16mm) contour or 1” (26mm) contour grilles mounted between
the glass panes suspended within the air cavity and color matched to
the extrusion color.
INSTALLATION
Installation per JELD-WEN Installation Method for Vinyl Windows
JII001, JII010 or JII011. See www.jeld-wen.com/resources for
instructions.
PERFORMANCE
NFRC Certified - (rated and labeled in accordance with NFRC)
AAMA/NWDMA I.S.2-97
R20-DP rated
Double-Hung Windows
F lat Casing Vinyl