Manual

INSTALLATION INSTRUCTIONS

AuraLast

Exterior Door Frame Assembly Instructions

DOOR UNIT ASSEMBLY

Door Unit Illustration

Frame Assembly Illustration

Mostdoorsanddooropeningsarenotconsistentinheight

andwidth.Thisframekitisslightlyoversizedinorderto

accommodateforthesevariations.

Theheadjambandsillshouldbecut(1/4"-noless)widerthan

thedoorwidth.Theframewidthshouldallowfor(1/8"-no

less)reveal.

Cutsidejambs(1/8"-noless)forrevealatthetopandmake

surethelengthallowsforthebottomdoorsweeptocompress

slightlyonthesillforaweather-tightt.

Note: Make sure the reveal is consistent all the way around the

door to prevent sticking.

StrikeSide

Jamb

StrikePlate

HeadJamb

Sill

Reveal-between

door&doorframe

1/8"

Bottom-Sill&DoorSweep

Hinges

HingeSide

Jamb

Door Slab

Note: Hinge & Strike Jamb placement is

for illustration purposes only. Depending

upon the door in-swing, hinge & strike jamb

placement may be reversed.

1/8"