Installation Guide

ASSEMBLY AND INSTALLATION INSTRUCTIONS
for Premium Aluminum and Premium Atlantic Aluminum Sliding Patio Doors (JII020)
3
NEEDED MATERIALS & TOOLS
PARTS (INCLUDED WITH PATIO DOOR)
A #8 x 1" Phillips pan head sheet metal screw
B #8 X 3/4" Phillips pan head self-tapping screw
C Offset T clip (DP50 / DP80 doors only)
D Panel bumper
E Adhesive weather strip pad
F Head frame
G Left and right side frame
H Sill riser (on DP 80 doors, only)
I Sill track
- Handle package - not shown
- Interior door panel(s) – not shown
- Exterior door panel(s) – not shown
- Screen – not shown (optional, on some congurations)
MATERIALS
•Sealant(polyurethaneifpainted,100%siliconeifleftexposed)
•Shims,high-densityplasticorcomposite
•Backerrod
•Liquidappliedashing(Wet-Flash
®
PM-7000, or equivalent)
•JELD-WENself-adhesiveashing(part#08987)orequivalent,or
exible ashing (Width requirement may vary according to local code)
For installation in sheathed wall or open stud construction:
•#12x21/2"corrosion-resistant,at-headscrews;(lengthofscrew
must penetrate at least 1 3/4" into the framing). Forty (40) or more
screws will be needed for the smallest size door installation.
For buck framing in a concrete (masonry) structure:
•1/4"diameterself-tappingconcretescrews(Tapcon
®
,orequivalent);
length of screw must penetrate at least 1 1/4" into the concrete
For step-down landing:
•Sheetmetalashingorbendablevinylsheetingforsillpan
For concrete suboors in DP 50/DP 80 applications (securing the sill):
•1/4"diameterself-tappingconcretescrews(Tapcon
®
,orequivalent);
length of screw must penetrate at least 1 1/4" into the concrete
For wood suboors in DP 50/DP 80 applications (securing the sill):
•#12x2"corrosionresistantatheadscrews;lengthofscrewmust
penetrate at least 1 3/4" into the suboor
Note! Follow all material manufacturers’ instructions for proper use
and compatibility.
TOOLS
•Cuttingshears(sillpan)
•Tapemeasure
•Utilityknife
•Level(4'minimumrecommended)
•J-roller
•Caulkinggun
•Drillwithbits(assembly)
•Constructionstapler
•Puttyknife
•Screwdriver,Phillips
•Hammerdrillandmasonrybitsformasonryapplications
A
D
E
F
G
H
I
REMOVE PACKAGING
Remove packaging materials.
INSPECT DOOR
•Cosmeticdamage
•Includedparts(SeePartsListabove)
•Correctproduct(size,color,numberofpanels,gridpattern,glasstype,
etc.)
If any of the above represents a concern, BEFORE installing, contact
your dealer or distributor for recommendations.
1
REMOVE PACKAGING & INSPECT DOOR
C
B