Operating Guide

PRODUCT GUIDE
Aluminum Single-Hung Windows (JPG002)
2
NEEDED TOOLS
Note! Each tool is not required for every task.
NEEDED MATERIALS
NEEDED TOOLS & MATERIALS
Tape measuret
Levelt
Flat head t
screwdriver
Phillips head screwdrivert
4QJSBMBEKVTUNFOUUPPMBTLZPVSTVQQMJFSt
for one) or locking needle-nose pliers
#2 square head screwdrivert
Stringt
Tapet
SASH REMOVAL & INSTALLATION
The type of balance
the window has will
determine the steps
necessary to remove
the sash. Windows that
have metal clips in both
KBNCTKVTUBCPWFUIF
bottom sash, have block
and tackle balances.
Windows with a circular
rod with a screw in the
top (if there is a cover
in the track, snap it out
UPTFFUIFCBMBODFJOCPUIKBNCTIBWFTQJSBMCBMBODFT
BLOCK & TACKLE BALANCE
Removal
-PDBUFNFUBMDMJQTJO
TJEFKBNCTPOCPUI
sides of window.
2. From the interior,
lift bottom of take-
out clips with at
head screwdriver
until they snap into
angled position.
Leave take-out
clips in angled
position until sash is
reinstalled.
4MJEFUPQPGTBTI
several inches above
take-out clips.
4. Push sash toward
POFTJEFKBNCVOUJM
it is clear of the
PQQPTJUFTJEFKBNC
and remove.
Follow all manufacturers’ instructions and labels.t
Use proper and safe equipment and precautions if servicing the t
exterior side of windows above ground level.
Window insect screens are not security devices and will not prevent t
children, other people, or pets from falling through.
Use extra care when driving screws near glass unit to avoid breakage.t
PRECAUTIONS & SAFETY
Use caution when tightening screws to avoid stripping the screw t
holes.
4BTISFNPWBMDBOCFBXLXBSEBOEDPVMEDBVTFQIZTJDBMJOKVSZPSt
product damage; we recommend the help of a second person.
Maintain a strong grip on balance when removing or installing. t
Balances are spring-loaded and they will decompress quickly if
SFMFBTFEQPTTJCMZDBVTJOHQFSTPOBMJOKVSZBOEPSQSPEVDUEBNBHF
Beware of oil causing slippery surfaces.t
Installation
*GBOFXMPDLDBNFTFQBSBUFMZXJUIBOFXTBTIJOTUBMMOFXMPDLPOUP
new sash.
*OTFSUPOFTJEFPGTBTIJOUPPOFTJEFKBNCBCPWFNFUBMUBLFPVUDMJQT
'JUPUIFSTJEFPGTBTIJOUPPQQPTJUFTJEFKBNC
4. Close sash.
-FWFMUBLFPVUDMJQTýVTIUPTJEFKBNCT
5FTUTBTIPQFSBUJPO*GTBTIEPFTOPUNPWFGSFFMZPSMPDLEPFTOPU
engage, remove and reinstall.
SPIRAL BALANCE
Removal
*GSFQMBDJOHBTBTIXJUI
a new one, a balance
BEKVTUNFOUUPPM
should have been sent
with the new sash. If
the sash is not being
replaced or the tool
did not come with the
new sash, call us for an
BEKVTUNFOUUPPM
2. Unlock window and
open most of the way.
-PDBUFHVJEFCMPDLT
on all four corners of
the sash and remove
screws holding in the
guide blocks.
4. Use a at head screw
driver to pry guide
blocks off all four
corners (note position
for replacement) and
be careful not to scratch
the paint.
Take-out
clip
Sash
Block & Tackle
Balance
Take-
out clip
extended
Spiral Balance
Screw
Guide block
screw
Guide
block
Guide
block