Use and Care Manual

Care and Maintenance
Jeffrey Court highly recommends the use of a white polymer modified thin-set to achieve the best installation results.
Glass Mosaics and Tiles
Glass tiles can be routinely cleaned with any non-abrasive cleaning compound or formula that is recommended for both glass and stone.
Follow manufacturer’s instructions when using these products.
Natural Stone Mosaics and Tiles
Sealing all natural stone tiles with a high quality penetrating sealer prior to grouting is highly recommended to ensure easy cleaning and
maintenance regimen. Follow manufacturer’s recommendations for reapplication as part of an ongoing maintenance routine.
Mosaics Containing Metal
Do not use acids, alkaline, strippers or solvent based sealers on the copper as it may remove the antiquing and may cause stainless steel to
rust.
Over time all copper will patina due to oxidation (darkens or turns dark green). Once the copper patina is damaged or removed or stainless
steel has been damaged due to the use of acids, alkaline, strippers or solvent based sealers it cannot be repaired or replaced.
All metal can scratch and dent.
It is NOT recommended using mosaics containing copper or metal in wet areas, where there is consistent moisture or submerged in water.
This includes, but is not limited to, showers, steam showers, fountains and pools.