Instructions / Assembly

renincorp.com • acmesystemsandhardware.com

BARN DOOR HARDWARE KIT

BD100K-07800

ASSEMBLY INSTRUCTIONS

Step 10. Hanging the Door

Place the assembled door onto the secured rail and tighten

each anti-jump block. Ensure all parts are operating correctly

by sliding the door side-to-side.

Step 11. Floor-Mounted Door Guide Installation

Once the door is plumb, position the oor-mounted door

guide inside the mortised door, line up close to the opening.

Slide the door side-to-side to ensure functionality for nal

placement then mark holes with a pencil and pre-drill 1/4"

holes. If drilling directly into a concrete oor, use

the provided anchors.

1 3/16" (30mm)

1/4" (8mm)

Step 12. OPTIONAL Wall-Mounted Door Guide Installation

Line up close to the opening, position and secure the

wall-mounted door guide directly into the wall or trim,

extending the guide as necessary to allow the door to

travel side-to-side. Tighten to secure in place.

1 3/16" (30mm)

1/8" (3.175mm)