SDS

SAFETY DATA SHEET
FORM 1: COATINGS WITH NO REPORTABLE HAZARDOUS INGREDIENTS SDS DATE: 06/08/2016
PAGE 2 OF 5
SECTION 4: FIRST-AID MEASURES
EYES: FLUSH EYES WITH FRESH WATER FOR AT LEAST 15 MINUTES.
SKIN: WASH THOROUGHLY WITH SOAP AND WATER.
INGESTION: HAVE VICTIM DRINK ENOUGH FRESH WATER TO ENSURE DILUTION.
INHALATION: MOVE VICTIM TO FRESH AIR.
MOST IMPORTANT SYMPTOMS AND EFFECTS: MAY CAUSE MILD IRRITATION TO EYES AND SKIN, GASTROINTESTINAL
AND RESPIRATORY TRACTS. SLIGHT DIZZINESS, NAUSEA AND
HEADACHE POSSIBLE.
NOTES TO FIRST AID PROVIDERS: CALL FOR MEDICAL ASSISTANCE IF SYMPTOMS PERSIST.
SECTION 5: FIRE-FIGHTING MEASURES
SUITABLE EXTINGUISHING MEDIA: FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL, WATER FOG.
UNUSUAL FIRE AND EXPLOSION HAZARDS: LIQUID MATERIAL IS NON-COMBUSTIBLE, BUT DRIED FILMS ARE CAPABLE OF
SUPPORTING COMBUSTION WHEN IN CONTACT WITH OPEN FLAMES. CLOSED
CONTAINERS CAN DEVELOP INTERNAL PRESSURE AND MAY RUPTURE WHEN
SUBJECTED TO EXTREME HEAT.
HAZARDOUS COMBUSTION PRODUCTS: COMBUSTION CAN PRODUCE CARBON MONOXIDE AND/OR CARBON DIOXIDE.
SPECIAL EQUIPMENT & PRECAUTIONS: USE SELF-CONTAINED BREATHING APPARATUS IN CONFINED SPACES. OBSERVE
RECOMMENDED PROCEDURES FOR HANDLING ORDINARY COMBUSTIBLE
MATERIALS.
SECTION 6: ACCIDENTAL RELEASE MEASURES
PERSONAL PRECAUTIONS, PROTECTIVE
EQUIPMENT, EMERGENCY PROCEDURES: WEAR WATERPROOF GLOVES TO AVOID SKIN CONTACT. KEEP CHILDREN AND
PETS AWAY FROM SPILLED LIQUID. PREVENT LIQUID FROM ENTERING DRAINS.
METHODS AND MATERIALS FOR
CONTAINMENT AND CLEAN UP: DIKE SPILLED LIQUID WITH INERT MATERIAL, SUCH AS CLAY GRANULES. SCOOP
UP EXCESS LIQUID AND POUR INTO CONTAINER. USE PAPER OR CLOTH WIPES
TO CLEAN UP SMALL SPILLS. ALLOW TO DRY BEFORE DISPOSAL.
SECTION 7: HANDLING AND STORAGE
SAFE HANDLING PRECAUTIONS: KEEP CONTAINERS CLOSED WHEN NOT IN USE. DO NOT STACK CONTAINERS MORE THAN
THREE HIGH. SECURE LOADS AGAINST SHIFTING DURING TRANSPORTATION. USE ONLY
AN APPROPRIATE TOOL TO OPEN CONTAINERS.
SAFE STORAGE CONDITIONS: STORE IN COOL, WELL-VENTILATED AREA. MAINTAIN TEMPERATURE BETWEEN 40ºF AND
90ºF. AVOID EXPOSURE TO DIRECT SUNLIGHT, HEAT OR FLAME. INSPECT CONTAINERS
FOR LEAKS PERIODICALLY. ROTATE STOCK, USE OLDER MATERIAL FIRST.
INCOMPATIBILITIES: DO NOT HANDLE OR STORE NEAR WATER-REACTIVE MATERIALS, STRONG OXIDIZERS,
ACIDS OR ALKALIS.