User guide

Pair (Link) UConnect™ System to a Cellular Phone
To begin using your UConnect™ system, you must pair
your compatible Bluetooth™ enabled cellular phone.
To complete the pairing process, youwill need to reference
your cellular phone owner’s manual. The UConnect™
website may also provide detailed instructions for pairing.
The following are general phone to UConnect™ System
pairing instructions:
• Press the “Phone” button to begin.
• After the 9Ready9 prompt and the following beep, say
9Setup Phone Pairing.9
• When prompted, after the beep, say 9Paira Phone9 and
follow the audible prompts.
• You will be asked to say a four-digit pin number,
which you will later need to enter into your cellular.
You can enter any four-digit pin number. You will not
need to remember this pin number after the initial
pairing process.
• For identification purposes, you will be prompted to
give the UConnect™ system a name for your cellular
phone. Each cellular phone that is paired should be
given a unique phone name.
• You will then be asked to give your cellular phone a
priority level between 1 and 7, 1 being the highest
priority. You can pair up to seven cellular phones to
your UConnect™ system. However, at any given time,
only one cellular phone can be in use, connected to
your UConnect™ System. The priority allows the
UConnect™ system to know which cellular phone to
use if multiple cellular phones are in the vehicle at the
same time. For example, if priority 3 and priority 5
phones are present in the vehicle, the UConnect™
system will use the priority 3 cellular phone when you
make a call. You can select to use a lower priority
cellular phone at any time (refer to 9Advanced Phone
Connectivity9).
80 UNDERSTANDING THE FEATURES OF YOUR VEHICLE