Use and Care Manual
Step 2: Attach a decorative side (F) to the top ring (E) with two M6X10 bolts (J), but do not
fully tighten. Repeat with the other four decorative sides (F).
Step 3: Connect the assembled stand (F+E) to the Base (G) with ten M6X10 bolts (J).
Tighten all M6x10 Bolts now from Step 2 and Step 3.
Step 4: Place the fire bowl (D) on the assembled stand (F+E+G) and insert the fire grate (C)
into the bottom of the fire bowl (D). Place the assembled mesh scree
n (A+B) on the fire
bowl to complete the fire pit.
F
E
J
J
E
F
JG
J
B
C
D
3/3