Third Party Verification Claim

Test Report
Number：
SHAH01476379
Tests Conducted
Page 15 of 17
INTERTEK TESTING SERVICES LTD.
ZHEJIANG
浙江天祥质量技术服务有限公司
Building No.2, Juanhu Science and Technology
Innovation Park, No. 500 East Shuiyueting Road,
Haining City, Zhejiang Province,China. 314400
中国浙江省海宁市水月亭东路 500 号鹃湖科技创新
园 2 幢 314400
Tel: [phone]
Zip:314400
www.intertek.com
www.intertek.com.cn
Clause Test item Verdict
shall be 2.4 mm (3/32 in.) as measured by characters such as b, 1, or H. A contrasting background
shall be provided for legibility.
When a furnishing is produced or assembled at more than one plant, each finished furnishing shall
have a permanent unique plant identifier marking.
Instructions
41 General
41.1
A furnishing shall be provided with legible instructions pertaining to the risk of fire or injury to persons
that is associated with the use of the furnishing, such as operation, user-maintenance, loading, and
storage.
NC
(See remark
1)
41.2
The instructions shall include the markings, or equivalent, specified in Section 40, excluding the date
code (40.1(c)) and manufacturing plant identifier (40.3).
NC
(See remark
1)
41.3
When parts of the furnishing are able to be adjusted or manipulated by the user, such as an
adjustable chair or table, or a leveling mechanism, instructions shall be provided regarding their use.
NC
(See remark
1)
41.4
An illustration is able to be used with a required instruction to clarify the intent, but shall not replace
the written instruction.
NC
(See remark
1)
41.5
Instructions pertaining to a risk of fire or injury to persons shall warn the user of foreseeable risks
and state the precautions that are to be taken to reduce such risks.
NC
(See remark
1)
41.6
Warnings pertaining to a risk of fire or injury to persons shall be in the first part of the instructions,
before the operating instructions, separate in format, such as included in a border, from other
instructions related to assembly, operation, maintenance, and storage.
NC
(See remark
1)
41.7
The height of lettering in the text and illustrations of the instructions shall be as follows:
a) Upper case letters – not less than 1.9 mm (5/64 in.); and
b) Lower case letters – not less than 1.6 mm (1/16 in.).
NC
(See remark
1)
41.8
The statement “IMPORTANT SAFETY INSTRUCTIONS” or the equivalent shall precede the list of
instructions required by 41.9 and the statement “SAVE THESE INSTRUCTIONS” or the equivalent
shall either precede or follow the list.
NC
(See remark
1)
41.9
The instructions shall include the items in the following list, as applicable, and any other instructions
that the company determines are required for the furnishing. The statement ″Read all instructions
before using″ shall precede the list of items. The items are able to be numbered.
IMPORTANT SAFETY INSTRUCTIONS
When using furnishing, basic precautions should always be followed, including the following:
Read all instructions before using (this furnishing).
To reduce the risk of injury to persons:
1. Close supervision is necessary when this furnishing is used by, or near children, or disabled
persons, if applicable.
2. Use this furnishing only for its intended use as described in these instructions. Do not use
attachments not recommended by the manufacturer.
3. If a chaise lounge chair with wheels is not intended to be portable while a user is seated in it, a
statement not to move the chaise lounge chair when occupied shall be included.
4. Tables which have a hole for an umbrella, but which are not intended to support an umbrella
alone, a statement indicating that an umbrella shall always be used with a suitable base.
NC
(See remark
1)
Appendix A Test method and requirement for Swing or Hanging chairs
A1
Front and Rear Stability Test for Hanging Chairs
This test applies to all hanging chairs.
Load the chair with the 11 disks (18.3.1) or with 110 kg mass as alternative to rest against the chair
back. For multiple seating, only load one of the most adverse position.
Pull the seat back in the direction causing the least stability until the chair touches the support bar, or
any restriction is reached, or up to 25°. Release the seat and allow it to swing.
The chair should not overturn.
NA
A2 Static Load Test of Seat
NA