Third Party Verification Claim

Test Report
Number：
SHAH01476379
Tests Conducted
Page 14 of 17
INTERTEK TESTING SERVICES LTD.
ZHEJIANG
浙江天祥质量技术服务有限公司
Building No.2, Juanhu Science and Technology
Innovation Park, No. 500 East Shuiyueting Road,
Haining City, Zhejiang Province,China. 314400
中国浙江省海宁市水月亭东路 500 号鹃湖科技创新
园 2 幢 314400
Tel: [phone]
Zip:314400
www.intertek.com
www.intertek.com.cn
Clause Test item Verdict
If adjustable features are available, all adjustments shall be set at normal use conditions.
A weight of 109 kg (240 lb.) shall be secured in the center of the seat.
The loading device shall be adjusted to apply a 334 N (75 lbf) total force to the backrest for 25,000
cycles.
When testing multiple-seating units, the durability test shall be performed on each backrest positions
one by one on the same sample.
The loading device shall be set at a rate between 10 and 30 cycles per minute.
For Safety Level – Stage 1: there shall be no loss of serviceability.
For Safety Level – Stage 2 or Performance Level (Stage 3): the product must not show sudden and
major change in structural integrity. The product can show minor damage or loss of serviceability
38
Leg Strength Test – Front and Side Application
This test applies to all chase lounges.
If adjustable features are available, all adjustments shall be set at normal use conditions.
NA
38.2
Front load test
Functional load:
A force of 334 N (75 lbf) shall be applied once to each front leg individually for one (1) minute then
remove the force.
Normal (Functional) load(s) applied once in each direction shall cause no loss of serviceability.
Proof load:
A force of 503 N (113 lbf) shall be applied once to each front leg individually for one (1) minute then
remove the force.
Abnormal (Proof) load(s) applied once each direction shall cause no sudden and major change in
the structural integrity of the chair. Loss of serviceability is acceptable.
NA
38.3
Side load test
Functional load:
A force of 334 N (75 lbf) shall be applied once to a front and rear leg individually for one (1) minute
then remove the force.
Normal (Functional) load(s) applied once in each direction shall cause no loss of serviceability.
Proof load:
A force of 503 N (113 lbf) shall be applied once to a front and rear leg individually for one (1) minute
and then remove the force.
Abnormal (Proof) load(s) applied once each direction shall cause no sudden and major change in
the structural integrity of the chair. Loss of serviceability is acceptable.
NA
39
Lifting Test for Mobile Chaise Lounge Chair
This test applies when a chaise lounge is intended to be moved when a person is seating in it.
A load of 130 Kg shall be place on the chaise lounge at a point 175 mm (6.9 in.) forward of the
seat/back junction on the longitudinal axis of the chaise lounge chair, or the point closest to this that
allows the seat force to be applied.
The test should be run for 800 cycles.
There shall cause no loss of serviceability.
NA
Markings
40
General
A furnishing shall be plainly and permanently marked with:
a) The company’s name, trade name, trademark, or other descriptive marking by which the
organization responsible for the product is identifiable;
b) A distinctive catalog number or the equivalent;
c) The date or other dating period of manufacture not exceeding any three consecutive months.
Unless stated otherwise, all required markings shall be permanent die-stamped, ink-stamped, or
paint-stenciled lettering. Adhesive-backed label systems shall comply with the requirements for
outdoo
r
-use labels in the Standard for Markin
g
and Labelin
g
S
y
stems
,
UL 969. Minimum letter hei
g
ht
NC
(See remark
1)