Third Party Verification Claim

Test Report
Number：
SHAH01476379
Tests Conducted
Page 12 of 17
INTERTEK TESTING SERVICES LTD.
ZHEJIANG
浙江天祥质量技术服务有限公司
Building No.2, Juanhu Science and Technology
Innovation Park, No. 500 East Shuiyueting Road,
Haining City, Zhejiang Province,China. 314400
中国浙江省海宁市水月亭东路 500 号鹃湖科技创新
园 2 幢 314400
Tel: [phone]
Zip:314400
www.intertek.com
www.intertek.com.cn
Clause Test item Verdict
with eight loading discs, and place three
loading discs onto the footrest (or, for multiple seat units, load the footrest of the same seating
position) at a distance Z from the intersection of the seat and back.
The chaise lounge chair shall not tip over。
Values of Z
degrees mm
0 614
10 564
20 515
30 464
45 392
60 314
33.1.4
Sideways stability
Vertical forces of 600 N shall be applied at points C, D and E. If the arm rest is more than 406 mm
(16 in.) long, a vertical force of 250 N shall be applied at point F (the central point of the armrest),
instead that the 600 N force in point C. The forces shall be applied simultaneously for a minimum of
10 s.
The chaise lounge chair is not to tip over.
NA
33.1.5
Forward stability
A downward force of 600 N shall be applied to the load point 64 mm (2.5 in.) from the foot end of the
chaise lounge chair. Simultaneously, and an outward horizontal force of 20 N shall be applied to the
chaise lounge chair at the same height where the loading pad is in contact with the chaise lounge
chair surface. The forces shall be applied for a minimum of 10 s.
The chaise lounge chair is not to tip over.
NA
33.2
Backrest strength test – Static
This test does not apply to chaise lounge chairs with backrest height less than 200 mm (7.9 in.).
If the chaise lounge chair has an adjustable backrest angle, the test shall be performed with the
backrest in the most upright position and then repeated with the backrest in the first position from the
fully reclined position or 10° from the fully reclined position.
Functional load:
A force of 667 N (150 lbf) shall be applied to the backrest at the backstop position (For multiple
seating, the force shall be applied simultaneously to the two most adverse backrests) for one (1)
minute.
Remove the load.
A Normal (Functional) load applied once shall cause no loss of serviceability to the chair.
Proof load:
A force of 1112 N (250 lbf) shall be applied to the backrest at the backstop position (For multiple
seating, the force shall be applied simultaneously to the two most adverse backrests) for one (1)
minute.
Remove the load.
An Abnormal (Proof) load applied once shall cause no sudden and major change in the structural
integrity of the chair. Loss of serviceability is acceptable.
NA
33.3
Drop test – Dynamic
This test applies to all chairs.
If the chaise lounge chair has an adjustable backrest angle, the test shall be performed with the
backrest in the most reclined position.
Functional load:
A test bag weighing 102 kg (225 lb.) shall be raised 152 mm (6 in.) above the uncompressed seat
and released one time.
Then remove the bag.
Repeat setup and functional procedures for each remaining seating position on the same sample.
NA