User Manual

3.3 Installation Procedure – Repeater Mounting.

The JDTECK industrial digital repeater is designed to be mounted on a wall.

Carefully remove the repeater from the box and place it upright on a

protected surface like cardboard or carpet. Then remove the mounting

bracket from repeater and securely bolt bracket to the wall. Be sure to use a

plumb level so the bracket is perfectly straight when completed.

Install conduit from above ceiling to communications board, route coax

through conduit, then slide repeater onto bracket.

3.3 Installation Procedure – Repeater Mounting Cont.

Always dress in and label cables properly so communications

board looks neat and professional.