User Manual

Safety……………………………………………………………………….……………….2

1. Preface………………………………………………………………………………... 3

2. Introduction / Features & Functions……………………………………..5

3. DAS Installation..………………………………………………………………….7

3.1 Installation Procedure………………………………………...………………8

3.2 Installation Procedure – Antenna Mounting…………………….10

3.3 Installation Procedure – Repeater Mounting……………………11

4. Installing the Graphic User Interface (GUI)....….………………13

4.3 Accessing the GUI……………………..……..….………………15

5. Using the GUI……………………....……………………..…………….18

6. Testing………………..……………………………..………………...……….…..…22

7. Troubleshooting…………..…..…………………………………...……….……23

8. FCC Statement / Warning…….....……………………………………..…..24

9. Specifications…………..….....……………………………………..……………25

10. Abbreviations….……..….....……………………………………..……………27

For North American Market.

User Warnings – MUST READ!

1. This repeater must ONLY be used for the purpose it was intended

for. Making any alternations to the design layout without first

consulting with a trained technician can result in interference to

the operator’s network and liability by the end user.

2. Please read this entire manual carefully before using this product!

3. Only the power supply that came with the repeater should be

used at all times. It is highly recommended that the repeater

is grounded and lightning protection used.

4. Do not attempt to open any sealed part of the repeater. This will

void the warranty and can cause an electric shock.

Electrostatic can also cause damage to the internal

components.

5. Please keep away from any heating-equipment, because the

repeater will dissipate heat when working. Do not cover the

repeater with anything that influences heat-dissipation.

6. Do not use an unauthorized antennas, cables and / or coupling

devices not conforming with the ERP/EIRP and/or indoor-only

use restrictions.