User`s guide

3
Instructions for Use
To Wiremap a Cable
Using the RJ45 jacks, connect Net-Rite™
main unit and remote to the cable you
want to test.
An icon and the wiremap are always
displayed. Net-Rite™ reports:
PASS when the cable pins are
properly connected per T568A/B
and there are no other faults, or
an error icon when it does not
pass. Pins with errors flash an error
message: Miswire, Split, Open, Short,
or Reverse.
To Trace a Tone
Using the RJ12 jack on the remote,
connect the Trace-Rite™ Tone Generator
to the cable to be traced.
Slide the Tone Generator switch up to
select one of the two tones (stutter tone
or fast stutter tone). The green LED lights
and flashes intermittently to indicate the
tone generator is powered on and which
tone speed has been selected.
Press and hold the black button on the
Amplified Probe to turn on the probe.
1)
2)
a)
b)
1)
2)
3)