User`s guide

4
default menu item Telco Cable Test�
Pressing the mode button repeatedly
cycles through all the menu items
available for that mode:
While the unit is on, pressing any of
the three mode buttons (Telco, Coax
or Network) brings up the same menu
item previously selected for that mode�
Pressing the Power button momentarily
(for less than 2 seconds) toggles the EL
backlight� Pressing the Power button for
more than 2 seconds turns off the unit�
When the unit is off, pressing the Power
button turns on the unit� While the unit
is off, holding down the SETUP key and
then pressing the Network button starts
the unit in Diagnostic mode�
Telco
Mode
Coax
Mode
Network
Mode
Cable
Test
p
p
p
Map ID
p p
Length
p p p
Tone
p p p
Hub
Blink
p