User`s guide
25
Short – The pair has a low resistance
connection from one wire of the pair
to the other wire of the pair or to any
other wire in the cable or the shield�
A short is indicated by the Short icon
being displayed and ashing X’s in the
appropriate pin positions on the second
line for the pin numbers involved in the
shorts plus a ashing S icon if the shield
is shorted to a pin�
Miswire – A wire or both wires of a pair
are not connected to the correct pins
at the other end of the cable� The wire
map shows the pin numbers from line
1 (main) to line 2 (remote)� A reverse
pair is a special case of a miswire in
which the pair is wired to the correct pair
of pins or to another designated pair of
pins, but the two leads are reversed�
TestierPROf is able to test for split
pair errors as long as the wiring errors
are in pairs� The FAIL icon and the pin
numbers, which are miswired, will be
ashing.