User`s guide

Chapter 6 Interpreting Test Results
Status and Error Messages for Network Tests
68 LanScaperPRO Network Tester User’s Guide
Ping Test Detailed Status Messages
These messages may be displayed when the SEL key is
used to access the status details during active Pinging.
IP add = DNS add
The active Target IP address is the same as the DNS
Server IP address, so the Target Ping is automatically
disabled.
IP add = Rtr add
The active Target IP address is the same as the Router IP
address, so the Target Ping is automatically disabled.
No ARP Response
The IP address active for this conversation is being
ARP’ed, but is not responding. The IP address may be
unused, or the device may be powered off or not
connected.
No Ping Response
The IP address active for this conversation is not
responding to ping requests. If the addressed device is on
the LAN segment, it may be powered off or not connected.
If the addressed device is remote, it may be inaccessible
due to WAN problems, it may be powered off, or the
device at the Router IP address may not be forwarding the
ping packets.
LanScaperPRO_User_Guide.book Page 68 Friday, January 25, 2008 1:14 PM