User`s guide

Chapter 3 Performing Network Tests
Performing Ping Tests
26 LanScaperPRO Network Tester User’s Guide
The Ping Mode screen appears. (See Figure 8 on
page 26.)
Figure 8 The Ping Mode screen
6 (Optional) Select the DHCP mode to be used (DHCP
ON or DHCP OFF) by doing the following:
a Highlight the DHCP field using the arrow keys.
b Press the SEL key. The DHCP field starts
flashing.
c Use the arrow keys to change the on/off setting.
d To accept the new value, press the ACCPT key.
For more information on the DHCP ON and DHCP
OFF modes, see “Understanding DHCP ON/
DHCP OFF modes” on page 32.
7 (Optional) Select a different IP target to be used by
doing the following:
a Highlight the Tg (target number) selection field
using the arrow keys.
b Press the SEL key. The Tg field starts flashing.
LanScaperPRO_User_Guide.book Page 26 Friday, January 25, 2008 1:14 PM