User`s guide

Chapter 3 Performing Network Tests
Network Testing Overview
22 LanScaperPRO Network Tester User’s Guide
Network Testing Overview
The LanScaperPRO features five network test modes, as
described in the following sections:
– “Performing Port Discovery Tests” on page 23
– “Performing Ping Tests” on page 25
– “Performing Hub Flash Tests” on page 33
– “Performing Cisco Discovery Protocol Tests” on
page 35
– “Performing PoE Tests” on page 36
Accessing the
Network Test
Menu
Network tests are performed via the Network Test Menu.
To access the Network Test Menu
1 Scroll through the LanScaperPRO Main Menu (see
Figure 5 on page 18) using the arrow keys until
Network Test Menu is highlighted.
2 Press the SEL key.
The Network Test Menu appears.
Figure 6 The Network Test Menu
LanScaperPRO_User_Guide.book Page 22 Friday, January 25, 2008 1:14 PM