User`s guide

Chapter 1 Product Overview
Applications
4 LanScaperPRO Network Tester User’s Guide
– Displays length measurement for each pair in feet or
meters. Displays wiremaps and remote identifiers.
– Generates selectable tones on selected pins for use
with tone tracers.
– Provides support for six languages, selectable from
the setup options.
– Includes large backlit LCD that allows for clear
display of setup information and test results.
– Preserves battery life through low power consump-
tion and automatic turn off in any mode.
Applications
– Full cable testing with display of wiremap, ID, and
any faults detected with pair-by-pair status message
on shielded or unshielded network or coax cable.
– Remote mapping for up to 20 optional remote identi-
fiers (see “Accesories” on page 6) for room identifica-
tion.
– Cable length measuring for each pair using patented
cable capacitance method.
– Link testing to identify PoE voltage, advertised
speed, duplex mode, wiring mode, and polarity of
transmit pair on active Ethernet and other devices
connected to unknown jacks.
– Use of auto MDI/MDI-X protocol to instantly identify
hub, switch, or NIC ports with straight through or
crossover cable.
– Testing of PoE to ensure adequate power is present
for powered devices such as VoIP phones.
LanScaperPRO_User_Guide.book Page 4 Friday, January 25, 2008 1:14 PM