User's Manual

COD. 1248017-GB / 1.2

BASE500

TOTAL RESET

In programming mode, the programming button is held down and the “MR” reset jumper

is bridged for 3 secs. The receiver will issue 10 short acoustic warning signals followed by

others at a faster pace to indicate that the operation has been successful. The receiver is

now in programming mode.

After 10 seconds without programming or quickly pressing the programming button, the

receiver will exit programming mode, issuing two acoustic signals of 1 sec.

GROUPS

Receivers can be configured with a group (from 0 to 7) so that there is no interference

when working near each other.

125kHz

125kHz 868MHz

125kHz

C3- G1

C2- G2

C3- G1

125kHz 868MHz

C2- G1

C3- G2

C2- G2

C3- G2

C1- G0

C2- G0

C=channel

G=group

N.B. Group 0 enables all groups.

GROUP CONFIGURATION

The configuration can be carried out with the programming tool or by self-programming as

follows.