User's Guide

ASSISTANT FCC
2
3.2 DRIVERS INSTALLATION
Insert the USB memory stick in a USB port of the PC. Connect the USB cable to the programmer and the PC. A window
will open on the PC containing the message “New hardware found” and the Windows assistant for new hardware found
will auto-run. Follow the instructions given on screen. During hardware installation, the assistant will ask you to select the
USB driver path. Select the USB unit.
3.3 RUNNING
On running the application, the programme will request a login and password. The login is “softadmin” and the password is
“assistant” by default.
User: softadmin
Password: assistant
USE OF THE PROGRAMMER
For information, please read the help in the Soft-ASSISTANT programme.
The manufacturer reserves the right to modify equipment specifications without prior notice.
FCC / ISED COMPLIANCE
Model: ASSISTANT FCC
FCC ID: U5Z-ASSISTANT
IC: 8572A-ASSISTANT
JCM Technologies has not approved any changes or modifications to this device by the user. Any changes or modifications
could void the user’s authority to operate the equipment.
JCM Technologies S.A. n’approuve aucune modification apportée à l’appareil par l’utilisateur, quelle qu’en soit la nature.
Tout changement ou modification peuvent annuler le droit d’utilisation de l’appareil par l’utilisateur.
This device complies with Part 15 of the FCC Rules and Industry Canada’s licence-exempt RSS standards. Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
FCC Class B digital device notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.