Users Manual Part 1

English
To search for and connect to the unit
from a Bluetooth device:
3 Tap Search On Device.
4 The unit can be detected as "i10" by
other devices for two minutes.
Within two minutes, pair and connect
the Bluetooth device by following the
device's specific procedures.
5 If the Bluetooth device requests a
passkey, enter the default passkey for
the unit, "0000".
Note
• To change the unit's passkey, go to the
phone screen, tap Set up > Device >
Change Passkey.
To search for and connect a Bluetooth-
enabled device from the unit:
3 Tap Search On Car.
4 From the list of detected devices, tap
the name of the device, and tap
Connect.
5 On the device that you are connecting
to, confirm the pairing and data access
request from the unit.
6 If a passkey is required at the Bluetooth
device, enter the passkey displayed on
the Bluetooth device and tap OK.
When the devices are paired and
connected, the name of the Bluetooth
device appears on the screen showing
"Bluetooth device connected" as its status
and . The Bluetooth device is added to
the unit's paired device list and is ready to
be used with the unit.
Note
• The unit can pair with up to five Bluetooth
devices. Device information is stored in the
unit's memory and device pairing will not
be required for subsequent connections
unless the devices are deleted from the
paired device list.
• For hands-free operation, only one mobile
device can be connected to the unit at a
time.
• Bluetooth connections between your unit
and mobile devices are normally
established using the Hands Free Profile
(HFP). However, some mobile devices may
only allow a connection using the Head Set
Profile (HSP). In HSP, some functions may
not be available.
Bluetooth Connectivity▐
23
5