OPERATOR'S MANUAL MAINTENANCE

Section 3 - Maintenance
Routine Maintenance
Fuel System
3-76 3-76
9803/JSM-0412
Changing the Primary Filter/Sedimenter
Element
1 Park the machine on firm and level ground. Stop the
engine and remove the key.
2 Locate filter/sedimenter A.
3 Drain and remove the water separator bowl.
4 To remove the filter element, release locking ring D
and discard element.
5 Fit new element and secure in position with locking
ring D.
6 Refit water separator bowl.
Changing the Fuel Feed Pump Filter
1 Park the machine on firm and level ground. Stop the
engine and remove the key.
2 Locate fuel feed pump A.
Fig 52.
3 Rotate cover B counter clockwise and remove.
4 Remove magnet D and wash with clean fuel.
5 Remove filter element C.
6 Replace magnet and fit new filter element.
7 Fit cover B and rotate clockwise to secure.
8 Remove any spilt fuel.
A
C
D
B