OPERATOR'S MANUAL MAINTENANCE

Section E - Hydraulics
Rotary Coupling
Dismantling
E-174 E-174
9803/9880-3
Dismantling
as a guide to the dismantling and assembly procedures
refer to the sectional illustration,
K Fig 1. ( T E-171).
1 Remove the bolt 5-B and cover 5-A.
2 Remove the 'O'-ring 5-C.
Do not reuse the 'O'-ring 5-C.
3 Remove bolts 5-D and the thrust plate 5-E.
4 Remove seal 5-F.
Fig 5.
5 Using a jig push off the axle 6-G from the rotor 6-H.
Do not hit with a hammer.
Fig 6.
6 Remove the V-ring 7-J and nylon ring 7-K from the
axle 7-H.
Note: Do not reuse the V-ring J and nylon ring K.
716630-C1
A
B
E
D
C
F
C031300-C1
G
H