OPERATOR'S MANUAL MAINTENANCE

Section 3 - Maintenance
Routine Maintenance
Service Schedules
3-8 3-8
9803/JSM-0412
Pre Start Cold Checks, Service Points and Fluid Levels
Operation 10 50 250 500 1000 2000 4000 5000
ENGINE
Oil level - Check

Oil and Filter
(1)
- Sample/Change

Pre Cleaner (if fitted) - Clean

Air Cleaner Outer Element - Change

Air Cleaner Inner Element - Change

Air Cleaner Dust Valve - Check and Clean

Fuel Level - Check

Fuel Tank - Water and Sediment - Drain

Coolant Quality/Level - Check

Coolant - Change

Fuel Pump Filter Element - Change

Primary Fuel Filter/Sedimenter - Drain and Clean

Primary Fuel Filter/Sedimenter-filter - Change

Main Fuel Filter/Sedimenter - Drain and Clean

Main Fuel Filter/Sedimenter-filter - Change

Fuel Filler Cap - Check and Clean

Fuel Filler Cap (Dusty conditions) - Check and Clean

Fan Belt Tension/Condition - Check

Valve Clearances - Check and Adjust

Engine Mounting Bolts for Tightness - Check

Exhaust System Security - Check

Air Inlet System Security - Check

Radiator - Clean and Check
