OPERATOR'S MANUAL MAINTENANCE

Section C - Electrics
Basic System Operation
EMS Set Menu.
C-116 C-116
9803/9880-3
EMS Set Menu.
When the SET button on the EMS is pressed a sub menu
structure appears, enabling the operator to customise the
machine operations and confirm the local time/date. The
following functions are available: The up/down arrows
scroll through the menu and the item is selected by
pressing the "ACK" button. Pressing "SET" at any time will
return the operator to the normal display.
INT WIPER S X Intermittent wiper speed. Scroll keys to increase/decrease the delay between strokes
time. "ACK" to accept new value.
LANGUAGE Language can be changed between one and up to four languages, the languages are
installed at machine set up.
DATE XX-XX-XXXX The current date. Use the scroll keys to increase the value. "ACK" to move to the
month section. Repeat until the year is entered "ACK" to return to menu.
CLOCK 12/24? 24 Clock format the arrow keys select 12/24 hour format. "ACK" to accept format then the
current time is displayed.
XX:XX Use the scroll keys to set the current time. "ACK" to accept value.
HAMMER
HOUR
XXXXX - -
XXXX
The total hours that the hammer pressure switch has been activated is displayed on
the left of the display (Up to 99,999 Max.) and the digits on the right which flash
represent the hours accumulated since the last hammer service (up to 9,999 max.)
The four flashing digits can be reset by pressing the "ACK" button.This Item will only
be displayed if previously selected in set up tool Reset Hrs? A further press of the
"ACK" button will set the hours since service to zero.
HAMMER
RPM
RPM XXXX The maximum hammer revs allowed. Use the scroll keys to set the desired rpm.
Increments/decrements in 50 rev/min. "ACK" to accept the new value.
REFUEL LVL XX Allow the fuel tank to be filled with fuel to a preset percentage, 50-100%
AUTO IDLE T XX Auto idle delay time. Scroll keys increase/decrease the delay time. "ACK" to accept
new delay time.