OPERATOR'S MANUAL MAINTENANCE

Section C - Electrics
Basic System Operation
Heated Seat
C-110 C-110
9803/9880-3
Heated Seat
Operation
C030500GB-2
Fig 99.
When the heated seat switch is selected, an electrical
current passes over the seat thermostat to the heating
element. The element will then warm the seat.
The thermostat is set to 20°C - ON and 30°C - OFF.
On initial starting when the heated seat switch is selected,
the heated seat element will turn on only if the thermostat
is below 30°C. Once the thermostat reaches 30°C the
heater will turn off. The element will only be re-heated if the
thermostat temperature falls below 20°C.