User guide 12V Portable Wet & Dry Vacuum Cleaner 70360
12V Portable Wet & Dry Vacuum Cleaner 70360 Thank you for purchasing this JCB product 2 JCB is a byword around the world for quality, innovation and success. With the application of stringent design parameters and utilising high performance, modern materials and manufacturing processes, your JCB product has been developed for optimum functionality and practical application.
SAFETY INSTRUCTIONS Product safety Personal safety • CAUTION!: Never use the appliance without the filter being installed. • CAUTION!: Never use the appliance to vacuum hot ashes, broken glass, sharp objects or liquids. • WARNING!: When using this vacuum cleaner, basic safety precautions, including the following, should be followed to reduce the risk of personal injury and material damage. Read all of this User Guide before using this vacuum cleaner.
Overview of the Appliance Components 4 ⁄ ¤ ‹ Â › Ê fi Á fl ‡ Ë · ‚ ‰ „ È 1 Carry handle 9 Extending Crevice tool 2 On/off switch 10 Hose 3 Charging indicator light 11 Carrying strap (including 2 x fixing screws) 4 Lock button 12 Charging jack 5 Motor housing 13 Battery door 6 Tank 14 Tank catches 7 Upholstery nozzle 15 Mains power charging adaptor 8 Brush attachment 16 In-car power charging adaptor
FITTING THE CARRYING STRAP To attach the carrying strap ‰, locate the two end plates of the strap into the holes provided in the motor housing fi of the cleaner as shown A. Secure the plates in position using the two cross-head screws (provided), ensuring the screws are tight. A The strap is adjustable to the user by sliding the strap material through the buckle to adjust. CHARGING THE BATTERY The product is supplied with the battery in a low charge condition. Charge the battery for 16 hours before use.
EXTENDING CREVICE TOOL ‚ 6 This is useful for spot cleaning and hard to reach places. To extend the crevice tool ‚, pull out the extending section. To retract, push the button on the side and push the end back into the tool body D. D WET PICK-UP When picking up liquids, do not fill beyond the max fill line. EMPTYING To empty, lift the two tank catches Á on either side of the motor housing fi and lift off the top section of the cleaner from the tank fl G. Empty the tank fl.
STORAGE 2. After use, for tidy storage, the hose „ should be wrapped around the cleaner and the extending crevice tool ‚ located in its storage clip I. Pull off the electrical terminals from the battery to allow the battery to come free from the cleaner K. Dispose of in accordance with local regulations. K I 3. Dispose of the remainder of the product also in accordance with local regulations. HELPLINE BATTERY REMOVAL If you have any difficulty with your appliance, do not hesitate to call us.
Guarantee Exclusions JCB shall not be liable to replace or repair the goods under the terms of the guarantee where: 8 It is important to retain the retailer’s receipt as proof of purchase. Staple your receipt to this back cover for future reference. Please quote the following information if the product develops a fault. These numbers can be found on the base of the product. 1.
