Owner`s manual

17
www.jbl.com
ENGLISH
PROBLEM SOLUTION
No sound (display is not illuminated): Make sure that the power supply is properly connected to the JBL On Air Wireless and to a working AC outlet.•
No sound (display is illuminated) : Touch the Volume Up (+) button to increase the system volume. •
If you’re using FM radio, make sure that the included FM antenna is properly connected and that the JBL On Air Wireless is •
tuned to an active FM frequency.
If you’re using a docked iPod/iPhone device, make sure that it is properly docked in the JBL On Air Wireless. •
If you’re using an auxiliary audio source, make sure that the audio cable is properly connected to the JBL On Air Wireless’s Aux •
Input connector and to the source component’s audio output.
If you’re using an AirPlay source, make sure that you have selected the correct network in the JBL On Air Wireless’s Network •
Setup screen. (See Settings: Network , on page 14.)
Make sure that the iPod device, AirPlay source or auxiliary source component is not in the Pause mode and that its volume •
control is not turned all the way down.
Sound crackles, hisses or is distorted: Turn the iPod device or other source component’s volume down.•
Make sure that the iPod device’s EQ setting is set to “O.”•
Loud hum or buzzing: Make sure that the audio cable is plugged all the way into the JBL On Air Wireless’s Aux Input jack.•
Replace the audio cable.•
Unplug the power supply and connect it to a dierent AC outlet.•
TROUbLEShOOTINg yOUR JbL ON AIR WIRELESS
0269CSK - On Air Wireless OM ENv6.indd 17 06/01/11 11:52:03