Data Sheet

Upgrade multi-element speakers and component systems engineered to deliver world-class
JBL performance and superior fit into most factory speaker locations
Club Speakers
Club 322F
2 x Speakers
1 x Foam gasket
Club 422F
2 x Speakers
1 x Foam gasket
Club 522F
2 x Speakers
1 x Foam gasket
Club 620F
2 x Speakers
1 x Foam gasket
16 x Screws
8 x Speed clips
8 x Plastic multi-hole adapter rings
Club 622
2 x Speakers
2 x Grilles
1 x Foam gasket
16 x Screws
8 x Speed clips
8 x Plastic multi-hole adapter rings
Club 6422F
2 x Speakers
1 x Foam gasket
Club 8622F
2 x Speakers
1 x Foam gasket
Club 9632
2 x Speakers
2 x Grilles
1 x Foam gasket
8 x Screws
8 x Speed clips
Club 602C
2 x Speakers
2 x Grilles
2 x Plastic multi-hole adapter rings
1 x Foam gasket
2 x Crossovers
2 x Tweeters
2 x Flush-mount cups
2 x Threaded flush-mount adapters
2 x Surface-mount cups
2 x Starfish tweeter mounts
2 x Plastics locking nuts
30 x Screws
8 x Speed clips
2 x Spacers
2 x Washers
Club 602CTP
2 x Speakers
2 x Grilles
2 x Plastic multi-hole adapter rings
1 x Foam gasket
2 x Crossovers
2 x Tweeters
2 x Flush-mount cups
2 x Threaded flush-mount adapters
2 x Surface-mount cups
2 x Starfish tweeter mounts
2 x Plastics locking nuts
36 x Screws
8 x Speed clips
4 x Spacers
2 x Washers
4 x Screws
2 x Tweeter pods
2 x 3M foam
Club 3412T
2 x Tweeters
2 x Flush-mount cups
2 x Threaded flush-mount adapters
2 x Surface-mount cups
2 x Starfish tweeter mounts
2 x Plastics locking nuts
6 x Screws
2 x In-line crossover pigtail
2 x Spacers
2 x Washers
Features and Benefits
Plus One
™
Woofer Cone Architecture
Patented (US patent #7,548,631) Plus One
™
cones provide more
overall speaker-cone area than other speakers for the same size,
resulting in higher sensitivity, increased low-frequency output and
greater musical character.
Edge-driven Silk Dome Tweeter
The Club 422F, Club 522F, Club 622, Club 8622F, Club 9632 feature
a full, edge-driven silk dome tweeter, which delivers a broader and
smoother high frequency response, never-harsh regardless of
output level than more commonly used w-domes.
Specified Shallow Design for More Mounting Application
Club 620F specified compact design for 6-1/2" that allows them to
fit in just about any vehicle on the road today. That means signature
JBL sound in more vehicles.
Adjustable Tweeter Output Level
The Club 622, Club 602C and Club 602CTP component systems
offer a tweeter output level control of 0dB or +3dB to optimize
system linearity based on installation location.
Acoustically Damped, UV-Resistant Polypropylene Cone
Every Club speaker’s woofer cone is designed to deliver clean,
non-resonant sound quality, while standing up to the demanding
heat and humidity of the car environment.
Bigger Magnet, Bigger Power Handling
The new Club lineup features a larger magnet delivering higher
power handling than competitors at similar price points.
Special Tweeter Pod Design for Acoustic Adjustment on
Different Listening Position
The Club 602CTP Component Speaker system not only including the
Starfish
™
Tweeter Mounting Adapter and I-Mount Tweeter Mounting
Kit but also offering the new installation possibility-Tweeter Pod.
It is easy to install, more importantly, the tweeter pod can adjust
the angle by up and down even after mounting, which allow you
to control the acoustic performance on different listening position.
Starfish
™
Tweeter Mounting Adapter
The club 602C component Speaker system come with the Starfish
™
tweeter mounting adapter. The Starfish tweeter mounting adapter
allows for easy installation of the tweeter behind factory grilles
and in locations such an A-Pillar. It also provides six break-off
mounting tabs to accommodate many mounting configurations.
The tweeter can be surface- or flush-mounted. The tweeter can be
easily serviced, and doesn’t require removing the whole assembly.
I-Mount Tweeter Mounting Kit
The I-Mount
™
(patent no. 5,859,917) tweeter-mounting system
allows easy and versatile installation of tweeters in each of the
component systems. It includes a flush cup and surface-mount
mounting hardware. With a 1-3/4" cutout and a 1" mounting
depth, installation becomes a snap. This allows the tweeter to be
flush-mounted and can be angled up to ±40 degrees. Locknuts
are included to keep everything in place, and the tweeter can be
replaced without removing the whole assembly.
What’s in the Box