Specification Sheet

JBL SCL-7
2-Way Dual 5.25-inch (130mm) In-Wall Loudspeaker
Highlights:
• 2-way in-wall loudspeaker system designed for off-axis
listening as LCR and surround channels
• 1-inch 2410H-2 compression driver tweeter mated to a
JBL patented High-Definition Imaging (HDI
™
) horn precision
molded baffle assembly
• Two 5.25-inch (130mm) Advanced Aluminum Matrix cone
cast frame woofers
• Can be mounted vertically or horizontally
• Patented Cat Claw installation mechanism
• Gold plated, spring-loaded binding posts
• Includes paintable zero-bezel, magnetically attached grilles
• Compatible with WB52 pre-construction bracket
General Specifications:
Type: 2-way in-wall loudspeaker
Low Frequency Driver: Two 5.25" (130mm) advanced Aluminum Matrix
cone cast-frame woofers (JW13Al-4)
High Frequency Driver: 1" (25mm) 2410H-2 Teonex
®
annular
ring-diaphragm compression driver
Recommended Amplifier Power: 25 – 150W RMS
Impedance: 4 Ohm
Loudspeaker Sensitivity: 88dB/2.83V/1m
Frequency Response: 55Hz – 30kHz (-6dB on-axis), 2pi anechoic
Crossover Frequency: 2.0kHz
High Frequency Coverage Angle (-6dB): 60° Vertical, 90° Horizontal
(Left: 30°, Right: 60°, from center line), from 2kHz to 15kHz
Enclosure Type: Open back
Controls: Boundary Proximity Control
Grille Dimensions: 7.32" (186mm) x 19.15" (486mm)
Product Dimensions (with grille):
7.32" (186mm) x 19.15" (486mm) x 3.88" (99mm)
Cut-out Dimensions: 18.03" (458mm) x 6.18" (157mm)
Rough-in Bracket: WB52
Mounting Depth: 3.64" (93mm)
Input Type: Gold-plated spring-loaded binding posts
Product Weight: 12.6 lbs (5.72kg)
Shipping Weight: 14.6 lbs (6.62kg)
Shipping Units of Measure: Each
Warranty: 5 Years