360P CONSOLE WIRELESS OWNER’S MANUAL
TABLE OF CONTENTS INTRODUCTION ........................................................................................................... 1 WHAT’S IN THE BOX..................................................................................................... 2 PRODUCT OVERVIEW ................................................................................................. 3 Controls on headset .................................................................................................................
Introduction Congratulations on your purchase! This manual includes information on the JBL QUANTUM360P CONSOLE WIRELESS gaming headset. We encourage you to take a few minutes to read this manual, which describes the product and includes step-bystep instructions to help you to set up and get started. Read and understand all the safety instructions before using your product. If you have any questions about this product or its operation, please contact your retailer or customer service, or visit us at www.
What’s in the box 06 01 02 03 01 JBL QUANTUM360P CONSOLE WIRELESS gaming headset 02 USB charging cable (USB-A to USB-C) 03 Removable microphone 04 2.
PRODUCT OVERVIEW Controls on headset 01 07 02 03 04 08 05 09 06 01 / • dial Balances the chat volume in relation to the game audio volume. 02 Volume +/- dial • 03 Adjusts headset volume. button • Press to mute or unmute the microphone. 04 Charging LED • Indicates the charging and battery status. 05 USB-C port 06 Jack for 2.5 mm boom microphone 07 Flat-fold ear cup 08 Status LED (Power / 2.
09 / slider • Slide upwards to power on and enter 2.4GHz pairing mode, or slide downwards to power off the headset. • Slide upwards and hold for 2 seconds to enter Bluetooth pairing mode. Controls on 2.4GHz USB wireless dongle 01 02 01 button • Hold for more than 5 seconds to enter 2.4GHz wireless pairing mode. 02 LED • Indicates the status of 2.4GHz wireless connection.
Getting started Charging your headset 2HR Before use, fully charge your headset through the supplied USB-A to USB-C charging cable. TIPS: • It takes approximately 2 hours to fully charge the headset. • You can also charge your headset through a USB-C to USB-C charging cable (not supplied).
Wearing your headset 1. Attach the detachable boom microphone. 2. Put the side marked L onto your left ear and the side marked R onto your right ear. 3. Adjust the earpads and headband for a comfortable fit. 4. Adjust the microphone as necessary.
Power on • Slide the power switch upwards to power on the headset. The status LED glows solid white upon powering on. Slide downwards to power off. First-time setup (for PC only) Download 3D audio technologies. from jblquantum.com/engine to gain access to Software requirements Platform: Windows 10 (64 bit only) / Windows 11 500MB of free hard drive space for installation TIP: • available on Windows only. Software installation required.
1. Connect the headset to your PC via 2.4GHz USB wireless connection (See “Using your headset”). 2. Go to “Sound Settings” -> “Sound Control Panel”. 3. Under “Playback” highlight “JBL Quantum360P Console Wireless Game” and select “Set Default” -> “Default Device”. 4. Highlight “JBL Quantum360P Console Wireless Chat“ and select “Set Default” -> “Default Communication Device”. 5. Under “Recording” highlight “JBL Quantum360P Console Wireless Chat” and select “Set Default” -> “Default Device”. 6.
Using your headset With 2.4GHz wireless connection 2.4G 1. Plug the 2.4GHz USB wireless dongle into a USB-A port on your PC, Mac, PS4/PS5 console, or Nintendo Switch™ console. 2. Power on the headset. It will pair and connect with the dongle automatically. Basic operation Controls Operation Volume dial Adjust main volume. button Press to mute or unmute the microphone.
To pair manually >5S 1. Power on the headset. 2. On the 2.4GHz USB wireless dongle, hold until the LED flashes white quickly. for more than 5 seconds Both LEDs on the headset and dongle turn solid white after successful connection. TIPS: • While the headset is not being charged, it turns off automatically after 10 minutes without wireless connection, or after 30 minutes with wireless connection but no audio input.
With Bluetooth (secondary connection) 01 >2S 02 Settings Bluetooth Bluetooth DEVICES JBL Quantum 360P ON Connected Now Discoverable With this function, you can connect your mobile phone to the headset while playing games, without worrying about missing important calls. 1. On the headset, push the Bluetooth pairing mode. / slider upwards and hold for 2 seconds to enter The status LED flashes quickly (pairing). 2.
Control calls ×1 ×1 ×2 When there is an incoming call: • Push the / slider upwards once to answer. • Push the / slider upwards twice to reject. / slider upwards once to hang up. During a call: • Push the TIP: • Use volume controls on your Bluetooth connected device to adjust volume.
Dual source switching This feature allows you to switch from game audio to incoming calls or music sources quickly and easily. 2.4GHz ON * 2.4GHz * 1. Ensure that your headset is connected to your mobile phone through Bluetooth and to your PC through 2.4GHz at the same time. 2. When you are playing games on your PC with the headset: • if there is an incoming call to your mobile phone, the game audio will be / slider upwards to interrupted by the ring tone.
Product Specifications • Model: QUANTUM360P CONSOLE WIRELESS • Driver size: 40 mm Dynamic drivers • Frequency response (Passive): 20 Hz - 20 kHz • Frequency response (Active): 20 Hz - 20 kHz • Microphone frequency response: 100 Hz - 8 kHz • Max input power: 30 mW • Sensitivity: 98 dB SPL @1 kHz / 1 mW • Maximum SPL: 94 dB • Microphone sensitivity: -42 dBV / Pa @1 kHz • Impedance: 32 ohm • 2.4GHz Wireless transmitter power: < 7 dBm (EIRP) • 2.4GHz Wireless modulation: GFSK • 2.
NOTE: • Technical specifications are subject to change without prior notice.
Troubleshooting If you have problems using this product, check the following points before you request service. No power • The headset turns off automatically after 10 minutes of inactivity. Power on the headset again. • Recharge the headset (see “Charging your headset”). 2.4GHz pairing failed between headset and 2.4GHz USB wireless dongle • Move the headset closer to the dongle. If the issue remains, pair the headset with the dongle again manually (see “To pair manually”).
• You may experience obvious sound quality degradation when using the headset near a USB 3.0 enabled device. This is not a malfunction. Use an extension USB dock instead to keep the dongle as far from the USB 3.0 port as possible. • Make sure the headset and 2.4GHz wireless dongle are paired and connected successfully. • The USB-A ports on some gaming console devices may be incompatible with the JBL QUANTUM360P. This is not a malfunction.
HP_JBL_Q360P_OM_SOP_V4_EN
