User manual

English

SYSTEM CONNECTIONS

If you have a Dolby

Digital or DTS

receiver/processor

with a low-frequency-effects (LFE) or subwoofer output:

If your receiver/processor does not contain a Dolby Digital

or DTS processor, but has subwoofer outputs:

Set line-level/LFE switch to

“Normal.”

NOTE: If your receiver/processor

has only one sub out, you may

use either the L or R input.

Set LFE/Normal switch to “LFE.”

33346_JBL ES150_250P_ENG 14/06/07 11:14 Side 5