Owners Manual

8
Input Volume Rotary Attenuator Controls
The Aux input volume rotary attenuator control on the front panel of the M-Patch
2 adjusts the level of monitored output signal for devices connected to the Aux
inputs (either the RCA or 1/8-inch, 3.5mm stereo min-jack) of the M-Patch 2.
The stereo input volume attenuator on the front panel of the M-Patch 2 adjusts
the level of monitored output signal for devices connected to the stereo inputs
(Combination XLR/1/4-inch, 6.5mm TRS connectors) of the M-Patch 2.
On/Off Mute Switch
The on/off mute switch on the front panel enables and disables the
M-Patch 2 built in mute function. Audio signal output is disabled
when the mute switch is in a depressed position.
The mute led will illuminate when the mute function is active.
Mono/Stereo Summing Switch
The mono/stereo summing switch on the front panel of the M-Patch
2 allows you combine the Left and Righ channels of a stereo signal
and listen to them in Mono. This can be very handy when testing
your audio for certain issues such as phase cancellation, or mixing
program for AM radio, etc.
Select the desired mode of operation by positioning the mono/stereo switch in
the up or down position.