Owners Manual

6
Stereo Inputs
The Stereo main inputs feature XLR bal/unbalanced combo connectors for
Left &Right input signal. This input is perfect for connection to your main audio
interface device (example; MBox 2, etc). Simply connect your cables directly to
the unit with either XLR or 1/4” (6.5mm) TS/TRS cables.
Aux Inputs
The Aux input channel features 2 x RCA (L&R) and a stereo 1/8-inch (3.5 mm)
mini-jack input. These connections are perfect for devices such as a CD players
line output or an 1/8-inch (3.5mm) stereo mini-jack connection from a computer
headphone jack or standard soundcard.
* Note: You can connect up to three different devices to the three physical
connector sets simultaneously. The input selector on the front panel allows
selection of the desired inputs!
Analog Audio Outputs
The M-Patch 2 features two (2) pairs (Left and Right) of XLR balanced analog
output connectors on the rear panel. These are labeled “1” & “2”.
Connect these outputs to your destination device (active monitors, digital
recorder, or wherever you need the attenuated output signal sent).
* Note: It is possible to activate or deactivate each desired output pair using
the output selector switches on the front panel. It is possible to have both
1&2 outputs active at the same time. This is very useful when simultaneously
connecting the outputs to a recording device and a monitoring system.