iPod not included / iPod non inclus User Guide English ® jbl radial micro superior loudspeaker dock for iPod ™
Important Safety Instructions Please read the following precautions before use: • Read instructions. All the safety and operating instructions should be read thoroughly before attempting to operate this audio system. • Retain instructions for future reference. • Heed warnings. All warnings on this audio system and in the operating instructions should be adhered to. • Follow instructions. All operating and use instructions should be followed. • Do not expose the speakers to liquid or solvent.
English jbl radial micro ™ Additional features IR remote – the JBL Radial™ Micro IR remote has several modes of operation. Music mode allows you to control the volume, change tracks, fast forward and fast reverse. Navigation mode allows you to navigate menus just as if you were touching the iPod. You can navigate your music, view your slideshows, and find and play your videos. Evercharge topology– the JBL Radial Micro system charges your iPod whenever you dock the iPod.
jbl radial micro general setup ™ 1. Unpack the JBL Radial™ Micro system. 2. Place the appropriate adapter for iPod into the docking station. 3. Place the iPod into the adapter. 4. Connect the power supply into the DC jack. 5. Plug the adapter into the wall outlet. 4 1 5 3 2 Listening to music from an iPod 1. Press the “power” button located on the back of the JBL Radial Micro unit to turn the unit on. A green LED will indicate that the unit is on. 2.
English Remote functionality Navigation control mode Volume Up/Down and Mute will work with all devices. Other functions work only when an iPod is docked. Turn iPod on: Turn iPod off: Bring up iPod menu: Scroll up: Scroll down: Go to previous menu: Select menu/track/feature: volume down Press any button on the remote control to wake the iPod. Press and hold the Play/Pause button for two seconds. Press the Menu button. Press the Scroll Up button. Press the Scroll Down button.
troubleshooting Symptom Possible Problem Solution Note No power to unit. Make sure wall power outlet or power strip has power. Make sure all switches for outlet/ power strip are on and that all switches for the unit are on. Is the LED on? Symptom Sound Quality No sound from system. Possible Problem Solution Input cable not plugged in properly. Check input cable connection. Sound Quality If the LED is not on, power is not getting to your JBL Radial Micro unit.
English Symptom Possible Problem Solution Technical Specifications Note Remote iPod does not respond to remote The remote’s battery power commands. may be low. Manufacturer: Model: Available in: Requirements: Replace battery. Redock the iPod. If problem persists, reset the iPod. Remote only operates at close range. Interference from surrounding devices. Move your JBL Radial Micro unit to another location. JBL Radial™ Micro unit is in “off” mode.
Harman Consumer Group, Inc. 8500 Balboa Boulevard, Northridge, CA 91329 USA 516.255.4525 (USA only) www.jbl.com © 2009 Harman International Industries, Incorporated. All rights reserved. Tous droits réservés. JBL and Odyssey are trademarks of Harman International Industries, Incorporated, registered in the United States and/or other countries. JBL Radial is a trademark of Harman International Industries, Incorporated. iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
