Owner`s manual

7www.jbl.com
English
SYNCHRONIZING WITH iTunes OPERATING YOUR JBL ON STAGE MICRO III
ON BATTERY POWER
iPod/iPhone CHARGING
NOTE: Before attempting to synchronize your iPod/iPhone with iTunes,
be sure both your iPod/iPhone and iTunes are updated to the latest
software version.
Before attempting to synchronize, be sure the JBL On Stage Micro III’s
USB port is connected to the computer on which your iTunes is located.
1. Place your iPod/iPhone on the JBL On Stage Micro III’s docking
connector. Make sure the iPod/iPhone is inserted all the way onto
the connector.
2. Use your computer’s iTunes software to synchronize the iPod/
iPhone with iTunes.
3. When you’re finished synchronizing, eject the iPod/iPhone from
iTunes.
If you have inserted batteries as explained in the JBL On Stage Micro III
Easy Setup Guide – Step 3, on page 3, you can unplug the JBL On Stage
Micro III’s power adapter and the unit will operate on battery power.
While running on battery power, the JBL On Stage Micro III will
automatically enter the Standby mode after the system detects no audio
signal for 5 minutes. Upon detecting an audio signal the system will
return to normal operation and the LED will light up.
When running on AC power, the JBL On Stage Micro III will automatically
enter the Standby mode after the system detects no audio signal for 10
minutes. As above, it will return to normal operation upon detecting an
audio signal, and the LED will light up.
Notes on battery power operation:
The JBL On Stage Micro III will not charge rechargeable batteries.•
The JBL On Stage Micro III will not charge a docked iPod/iPhone •
while under battery power unless it is also connected to a computer
via a USB cable.
The JBL On Stage Micro III will charge a docked iPod/iPhone under
these conditions:
When the JBL On Stage Micro III is being powered by its AC power •
adapter
When the JBL On Stage Micro III is connected to a computer via a •
USB cable
The JBL On Stage Micro III will not charge a docked iPod/iPhone while
under battery power unless it is also connected to a computer via a USB
cable.