Owner`s manual

5. Connect a USB Type Mini-B cable (not included) to the JBL On Stage

Micro III’s USB port and to a USB port on the computer on which your

iTunes is located.

IMPORTANT: If you play audio through a docked iPod/iPhone and

an audio source connected to the Audio In connection at the same

time, you will hear

both

of their outputs mixed through the JBL On

Stage Micro III. To hear only one source you will need to manually

turn off the source you do not want to hear.

6. If you are going to use your JBL On Stage Micro III with another audio

source, plug one end of a 3.5mm stereo cable (not included) into the

Audio In connector, and plug the other end into the audio source’s

audio out or headphone out connector.

7. Insert the included AC outlet adapter all the way into the power supply

(if there is more than one adapter, use the correct one for your region).

Then connect the power supply into the JBL On Stage Micro III’s 6V

DC In connector and plug it into an AC wall outlet.

USB Type Mini-B

1. 2.

3.5mm