User Manual
8
HARMAN International Industries, 
Incorporated 8500 Balboa 
Boulevard, Northridge, CA 91329 
USA
www.jbl.com
© 2017 HARMAN International Industries, Incorporated. All rights reserved.  JBL 
is a trademark of HARMAN International Industries, Incorporated, registered in the 
 United States and/or other countries. Features, specications and appearance are 
subject to change without notice. The Bluetooth
®
 word mark and logos are registered 
trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN 
International Industries, Incorporated is under license. Other trademarks and trade 
names are those of their respective owners. The terms HDMI, the HDMI logo, and 
High-Denition Multimedia Interface are trademarks or registered trademarks of HDMI 
Licensing LLC in the United States and other countries. Dolby, Dolby Audio, Pro 
Logic, and the double-D symbol are trademarks of Dolby Laboratories.
Торговая марка  :  JBL 
Назначение товара  :  Активная акустическая система 
Изготовитель  :  Харман Интернешнл Индастриз Инкорпорейтед, США, 06901 Коннектикут, г.Стэмфорд, 
      Атлантик Стрит 400, офис 1500
Страна происхождения  :  Китай 
Импортер в Россию  :  OOO “ХАРМАН РУС СиАйЭс“, Россия, 127018, г.Москва, ул. Двинцев, д.12, к 1 
Гарантийный период  :  1 год 
Информация о сервисных центрах  :  www.harman.com/ru тел. +7-800-700-0467 
Срок службы  :  5 лет 
Товар сертифицирован  :
Дата производства  : Дата изготовления устройства определяется по двум буквенным обозначениям из второй группы 
      символов серийного номера изделия, следующих после разделительного знака «-». Кодировка 
      соответствует порядку букв латинского алфавита, начиная с января 2010 года: 000000-MY0000000, 
      где «M» - месяц производства (А - январь, B - февраль, C - март и т.д.) и «Y» - год производства 
      (A - 2010, B - 2011, C - 2012 и т.д.).
TR04281_A
Note: JBL Bar Studio can only support sample rate <=96K audio 
but cannot support >96K audio content. There will be some 
expected noise output if you are playing those frequency >96K 
audio content.
10. TROUBLESHOOTING
If you have problems using this product, check the following points 
before you request service.
System
The unit will not turn on.
•  Check if power cord is plugged into the outlet and the soundbar
Sound
No sound from soundbar.
•  Make sure that the soundbar is not muted.
•  On the remote control, select the correct audio input source
•   Connect the audio cable from your soundbar to your TV or other 
devices.
•   Reset your soundbar to its factory settings via press and hold 
VOLUME -, VOLUME+ and SOURCE button on soundbar top 
panel
Sound is strange after sound setting adjustment
•   Reset audio setting by press and hold SOUND button on remote 
control for 5 seconds
Distorted sound or echo.
•   If you play audio from the TV through the soundbar, make sure 
that the TV is muted.
Bluetooth
A source device cannot connect with the soundbar.
•    You have not enabled the Bluetooth function of the source 
device. See the user manual of the source device on how to 
enable the function.
•   The soundbar is already connected with another Bluetooth 
device. Press and hold Bluetooth button on your remote 
control to disconnect the connected source device, then try 
again.
•   Reboot your Bluetooth device and try to pair again with the 
soundbar.
Quality of audio play from a connected Bluetooth device is poor.
•   The Bluetooth reception is poor. Move the source device 
closer to the soundbar, or remove any obstacle between the 
source device and the soundbar.
The connected Bluetooth device connects and disconnects 
constantly.
•   The Bluetooth reception is poor. Move your source device 
closer to the soundbar, or remove any obstacle between your 
Bluetooth device and the soundbar.
•   For some Bluetooth device, the Bluetooth connection can 
be deactivated automatically to save power. This does not 
indicate any malfunction of the soundbar.
Remote Control
The remote control does not work.
• Check if the batteries are drained and replace with new 
batteries.
•   If the distance between the remote control and the main unit 
is too far, move it closer to the unit.








