JBL BAR STUDIO OWNER’S MANUAL
TABLE OF CONTENTS 1. INTRODUCTION 3 2. WHAT’S IN THE BOX 3 3. PLACE YOUR SOUNDBAR 3 PLACE THE SOUNDBAR ON THE TABLE 3 WALL MOUNT THE SOUNDBAR 3 CONNECT YOUR SOUNDBAR 4 CONNECT SOUNDBAR TO YOUR TV 4. 5. 6. 7. 8. 2 9. PRODUCT SPECIFICATIONS 7 GENERAL 7 INPUT AND OUTPUT 7 BLUETOOTH SECTION 7 PRODUCT DIMENSION AND WEIGHT 7 10.
English 1. INTRODUCTION Wall Mount Brackets Thank you for purchasing the JBL BAR STUDIO. The JBL BAR STUDIO is designed to bring an extraordinary sound experience to your home entertainment system. We urge you to take a few minutes to read through this manual, which describes the product and includes step-by-step instructions to help you set up and get started.
. CONNECT YOUR SOUNDBAR This section helps you connect your soundbar to a TV and other devices, and set up the whole system. Connect Soundbar to your TV Connect Soundbar to other devices Connect devices through analog audio cables Using an analog cable, connect the AUX IN (3.5mm jack) on your soundbar to the AUX IN/ 3.5mm connectors on your portable devices. Connect your soundbar to a TV. You can listen to audio from TV programs through your soundbar.
English Remark: Press and hold remote control Bluetooth button for 3 seconds if you want to pair another mobile device b.
• Depending on some devices, it may not available to recognize the followings on this unit. -- External HDD -- Card readers -- Locked devices -- Hard type USB devices -- USB hub -- Using USB extension cable -- iPhone/iPod/iPad -- Android device Standard Movie Music Voice Sport 4. Night mode 6. SOUND SETTING This section helps you choose the ideal sound for your video or music. Before you start • Make the necessary connections described in the user manual.
English 8. SYSTEM 1. Auto standby This soundbar automatically switches to standby after 10 minutes of button inactivity and no audio/video play from a connected device. BT AUX HDMI USB OPTICAL MUTE BASS SHUFFLE VOLUME >3 s 2. Auto wake up *For non-compatible TV models, please follow section 7b and do IR remote learning Note: – Make sure that the sound output of your TV is set to “External speaker”. – Depending on the remote control, this function may not work well.
Note: JBL Bar Studio can only support sample rate <=96K audio but cannot support >96K audio content. There will be some expected noise output if you are playing those frequency >96K audio content. 10. TROUBLESHOOTING If you have problems using this product, check the following points before you request service. Bluetooth A source device cannot connect with the soundbar. • You have not enabled the Bluetooth function of the source device.
