Owner's Manual
28
JBL Pro Connect
The JBL Pro Connect app is a Bluetooth Low Energy control application used to remotely control the features within the EON
ONE MK2. The app is a free download on iOS and Android.
It is recommended that all users download the app and ensure their unit is operating on the latest firmware for the
best experience.
To charge your battery, remove the column with the battery indicator from the woofer and place it into the woofer hook up.
Power LED will light GREEN, indicating the battery is charging.
For Battery level, please refer to the battery icon on the LCD or the battery icon on the JBL Pro Connect App.
Battery
1. The EON ONE MK2 has a sleep mechanism when your unit is on battery. This is designed to improve the life of
the battery, both short and long term.
2. When your system has been inactive without signal detected on any channel, the amplier will go to sleep after
30 minutes.
3. The EON ONE MK2 will wake from sleep less than 2s after any of the following:
a. Signal detection above -56dbu on any channel
b. Any knob turn or action in the JBL Pro Connect app
4. No signal while on battery for over 5hrs will put the EON ONE MK2 back into an OFF state. The only way to wake
from this state is by pressing the power button.
APP
BATTERY SPECS
Cell Model Nominal Voltage Wh Recommended Operating Temp
INR18650-MH1 36V 97.2 Wh 15~35°C
QR CODE
TO APP PAGE
TO COME