User’s Guide 321.
CONTENTS Safety Instructions.................................................................................................................................... 4 Precautions............................................................................................................................................... 6 Declaration of Conformity.......................................................................................................................... 7 Intro to EON ONE MK2......................
SAFETY INSTRUCTIONS The EON ONE MK2 system covered by this manual is not intended for use in high moisture environments. Moisture can damage the speaker cone and surround and cause corrosion of electrical contacts and metal parts. Avoid exposing the speakers to direct moisture. Keep speakers out of extended or intense direct sunlight. The driver suspension will prematurely dry out and finished surfaces may be degraded by long-term exposure to intense ultra-violet (UV) light.
1. READ these instructions. 2. KEEP these instructions. 3. HEED all warnings. 4. FOLLOW all instructions. 5. DO NOT use this apparatus near water. 6. CLEAN ONLY with dry cloth. 7. DO NOT block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
PRECAUTIONS WARNING: This product is intended to be operated ONLY from the voltages listed on the back panel. Operation from other voltages other than those indicated may cause irreversible damage to the product and void the product’s warranty. The use of AC Plug Adapters is cautioned because it can allow the product to be plugged into voltages in which the product was not designed to operate. If you are unsure of the correct operational voltage, please contact your local distributor and/or retailer.
DECLARATION OF CONFORMITY WIRELESS TRANSMITTER COMPLIANCE INFORMATION: The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications were met. Le terme «IC:» avant le numero de certification radio signifie seulement que les specifications techniques d’lndustrie Canada ont ete respectees. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
INTRO TO EON ONE MK2 GETTING STARTED Congratulations on your purchase of JBL Professional EON ONE MK2 loudspeakers! We know you are anxious to get up and running as fast as possible, which is why you are reading this section. The following will help you get set up as soon as possible.
How to set up • • • • Plug battery spacer into woofer If column spacer is desired, plug column spacer into battery spacer. Plug Linear Array into Column Spacer Turn on AC Power Linear Array Column Spacer How to turn on/off • • Turn on unit by short pressing the power button until the LCD fires on Turn off the unit by HOLDING power button for 3s until unit turns off Battery Spacer Woofer 321.07 321.07 P.A.
BLOCK DIAGRAM 10
APPLICATION EXAMPLES CONDENSER MULTIPLE INSTRUMENTS/MICS PLUGGED INTO MIXER CH1 XLR-1/4” Combo Condenser Mic, CH2 XLR-1/4” Combo Mic, CH3 Passive Pickup Guitar, CH4 Active Pickup Guitar 11
USING TWO SYSTEMS AS MONITORS EON ONE MK2 Left and EON ONE MK2 Right 12
ACOUSTIC DISPERSION EON ONE MK2 13
MIXER PANEL Main/Menu Encoder LCD Display Back Button A G H Power Button USB Ports Multifunction CH LED Multifunction CH Volume C Limit LED B D F E I J XLR Male Loop Thru 3 combo XLR/ Power Inlet M A. LCD Display K 6.3mm Jack L 3.5mm Jack The LCD is used to display basic diagnostic information and allow access to more advanced features through a menu system. See the LCD GUI specification for more details on the LCD menu system, features, and navigation.
MIXER PANEL FUNCTIONS C. Main Volume / Menu Encoder Controls LCD Display • Rotary encoder: In Menu - Clockwise down menu/Anti-clockwise up menu • Press to select menu item • + On Home screen, Main Level increase by rotating the knob clockwise. + On Home screen, Main Level decrease by rotating the knob counterclockwise. Main encoder with detent: 70+/-40gf.cm D. Limit LED Amplifier is reaching clip. E.
I/O CH 1-2 • Phantom Power disclaimer When using condenser microphones, +48V phantom power is required to be present at the contacts of the microphone (XLR) connector for the microphone to operate correctly. When phantom power is enabled, it is applied to both the CH1 and CH2 XLR inputs. Ensure that phantom power is off when not required.
Buttons and Functions 1. The BACK button will back you out of the current screen you are in without saving changes. This can be thought of as a “CANCEL” button. 2. Holding the back button for 2s will engage Mix Mode Mix Mode 1. Press and Hold the BACK button for 2s to engage Mix Mode a. All LEDs will turn ON, indicating you’ve successfully initiated Mix Mode 2. In mix mode, the knobs will now control their respective channel gains.
EASYNAV LCD Intro to the EasyNav LCD Main Menu 1. Pressing the Main/Menu rotary at any time will take you to the EON ONE MK2’s main menu. Here, users can access the main menu functions of the EON ONE MK2. 2. “Ducking by Soundcraft” is a type of side-chain compressor most often used to lower the level of music playback while a person is talking into a microphone.
lower sensor level to trigger the music reduction. A lower value represents a less sensitive signal detection. i. ii. iii. 3. Select and edit these values by pressing the Main/Menu knob while Sensitivity Parameters is highlighted. . Navigate to the respective channel you wish to edit and press the Main/Menu knob to select. . Adjust the parameter. . Press the Main/Menu knob to save the adjustment . Press the BACK button to cancel this adjustment.
combinations. . iv. v. vi. vii. The user can select “Custom” and adjust all the settings themselves. Or they can start with one of the location description presets, listen, and then add any settings adjustments, which automatically load the new combination of settings into the “Custom” setting for further adjustments. . Custom . Room Small . Room Medium . Room Medium Bright . Room Large . Hall Medium . Hall Medium Bright .
. c. Press the MAIN/MENU knob to accept these changes. Press the BACK button to cancel these changes. Delay - The FX Processing Delay is designed to be a musically oriented delay, commonly used on rock and ballad vocals and guitars. It is often set to match the specific “Beats Per Minute” (i.e. “BPM) of the song currently being performed, plus how many delay returns are desired per beat, how long the delay keeps returning and if the delay feeds back again multiple times. i.
ix. “Level to Mix” sets the amount of final delay signal that contributes to the FX Return fader. . d. 4. 22 To adjust any parameter, navigate to the parameter using the MAIN/MENU knob. Press the MAIN/MENU knob to access. . Adjust the values by turning the knob CLOCKWISE or COUNTER-CLOCKWISE. . Press the MAIN/MENU knob to accept these changes. Press the BACK button to cancel these changes. Chorus is designed to add a musically oriented light shimmer on rock or ballad vocals and acoustic guitars.
processors provide detailed control for final processing and crossovers before feeding the mix to one or more speakers. This DriveRack functionality embedded into EON ONE MK2 is designed to optimize the combination of speaker and Pass Thru outputs built into this JBL speaker. a. AFS, or Automatic Feedback Suppression, is a combination of processing that can enable the user to add up to 3 dB more total gain to their output before getting audio feedback back in through the mix inputs.
In general, most users will leave this setting turned on, in case power is accidentally dropped in between the soundcheck AFS Fixed filter setup and the event. Groups that move speakers to new locations often may desire to set this feature off, as each location has different feedback challenges, which previous Fixed filters would not assist. 5. The Main EQ is a package of filter adjustments on the main mix before the audio feeds to the amp and speaker.
audio professionals. Small movements are best when adjusting limiters. 7. 8. Pass Thru and Time Align - Thru XLR output can be set to assist in feeding the mix to additional speakers. This section includes presets and settings based on the type of speaker the Pass Thru will be feeding and how it is positioned in comparison to this speaker and the audience. a. “Pass Thru” On/Off” enables or disables the Pass Thru XLR output feed. b.
Time alignment is not perfect as not all audience positions measure the same speaker distance differences. iii. “Delay Pass Thru Out” Using this delay will place speaker delay on the PASS THRU Output. iv. “Delay This Speaker” Using this delay will place the delay on the INPUT of the mixer of the current speaker. Channel Menu 1. The channel menu can be accessed by pressing the rotary knob of the respective channel you wish to access.
the MAIN/MENU knob. d. The FX Send section accesses the sends to each respective effect. All FX sends are “post fader level,” so when a user adjusts the channel fader, the same relative level or mute is reflected on the channel FX send. i. To access, navigate to the FX Send section and Press the MAIN/MENU knob. ii. Navigate to the effect send you wish to change and press the MAIN/MENU knob. . A clockwise turn will increase the effect send. . A counter-clockwise turn will decrease the effect send. .
APP JBL Pro Connect The JBL Pro Connect app is a Bluetooth Low Energy control application used to remotely control the features within the EON ONE MK2. The app is a free download on iOS and Android. It is recommended that all users download the app and ensure their unit is operating on the latest firmware for the best experience. QR CODE TO APP PAGE TO COME BATTERY SPECS Cell Model Nominal Voltage Wh Recommended Operating Temp INR18650-MH1 36V 97.
OPTIONAL ACCESSORIES SPARE BATTERY DUAL BATTERY CHARGER 29
EON ONE MK2 SPECIFICATIONS TECHNICAL SPECIFICATIONS System Type Powered Column PA Speaker Woofer Size 10" Tweeter Size 2" Tweeter Count 8 Max SPL 123db/119dB AC/Battery Freq Range -10 37-20kHz Freq Range -3 45-20kHz Hor Dispersion 140º Vert Dispersion 30º Power Rating 1500W Peak 400W RMS AC Power Input 300W 100-120V or 220-240V AC 50-60Hz Input Impedance 4kΩ balanced Combo 2MΩ balanced Hi-Z Jack 10kΩ 3.5mm single ended 2 channel.
CABLES & CONNECTORS XLR/F to XLR/M Microphone Cable The standard cable for interconnection of microphone and line level signal in professional audio systems. • Microphone to mixer TRS (balanced) 1/4 inch (6.35mm) phone jack to XLR/M For connecting balanced devices with 1/4 inch (6.35mm) phone and maybe used interchangeably. TRS (unbalanced) 1/4 inch (6.35mm) phone jack to XLR/M For connections of instruments with unbalanced outputs to balanced XLR inputs. TS (unbalanced) 1/4 inch phone (6.
CONTACT INFORMATION Mailing Address: JBL Professional 8500 Balboa Blvd. Northridge, CA 91329 Shipping Address: JBL Professional 8500 Balboa Blvd., Dock 15 Northridge, CA 91329 (Do not return product to this address without first obtaining prior authorization from JBL) Customer Service: Monday through Friday 8:00am -5:00pm Pacific Coast Time in the U.S.A. (800) 8JBLPRO (800.852.5776) www.jblproservice.com On The World Wide Web: www.jblpro.
WARRANTY INFORMATION The JBL Limited Warranty on professional loudspeaker products (except for enclosures) remains in effect for five years from the date of the first consumer purchase. JBL amplifiers are warranted for three years from the date of original purchase. Enclosures and all other JBL products are warranted for two years from the date of original purchase. Who Is Protected By This Warranty? Your JBL Warranty protects the original owner and all subsequent owners so long as: A.
07/21 8500 Balboa Boulevard Northridge, CA 91329 USA www.jblpro.
