PORTABLE PA USER'S GUIDE For: Français, Deutsch, Español, visit www.jblpro.
Contents Section 1: Important Safety Instructions.......................... 3 - 4 Section 2: Precautions............................................................ 5 Section 3: Declaration of Conformity ................................... 6 Section 4: Introduction to the EON208P PA System..... 7 - 11 Section 5: System Specifications........................................ 12 Section 6: Cables and Connectors ..................................... 13 Section 7: Contact Information ............................
Section 1: Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
Care and Cleaning EON208P systems may be cleaned with a dry cloth. Do not get moisture into any of the openings in the system. Ensure that the system is unplugged from the AC outlet before cleaning. THIS APPARATUS CONTAINS POTENTIALLY LETHAL VOLTAGES. TO PREVENT ELECTRIC SHOCK OR HAZARD, DO NOT REMOVE CHASSIS, MIXER MODULE OR AC INPUT COVERS. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Section 2: Precautions ! The EON208P PA system covered by this manual is not intended for use in high moisture environments. Moisture can damage the speaker cone and surround and cause corrosion of electrical contacts and metal parts. Avoid exposing the speakers to direct moisture. Keep speakers out of extended or intense direct sunlight. The driver suspension will prematurely dry out and finished surfaces may be degraded by long-term exposure to intense ultra-violet (UV) light.
Section 3: EON208P PA System Declaration of Conformity This equipment complies with the EMC directive 89/336/EEC Modified by 92/31/EEC 93/68/EEC 98/13/EEC and LVD 73/23/EEC modified by 93/68/EEC This product meets safety standards: EN60065:2002 UL6500 7th Edition: 2003 UL 60065 - STANDARD FOR AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY EQUIREMENTS - Edition 7 - Revision Date 2007/12/11 CSA C22.
Section 4: Introduction to the EON208P PA System Thank you for choosing the JBL EON208P PA system. The EON208P is a self-contained, portable PA system featuring multiple input channels with individual tone controls, Bluetooth® audio streaming, reverb and convenient output routing capabilities that allow the user to integrate the system into any number of audio environments.
4. Connect the Mixer Module to the Speakers On the back side of the mixer you will notice two ¼" phone jacks – these are your speaker output jacks. Take the speaker cables and connect them from these jacks to the jacks on the back of the speakers. To Left speaker To Right speaker 5. Connecting the AC Power Cable Connect the female end of the power cable to the mixer and plug the male end into the wall socket or extension cord. Turn the "MASTER VOLUME" control to "0".
Getting Acquainted with the EON208P Powered Mixer This part of the EON208P system houses the mixing board and power amplifier. You will connect all of the microphones, musical instruments, Bluetooth® audio device, external sound sources (like MP3 or CD players), in addition to any recording devices or additional speakers like a personal monitor, subwoofer or "Front of House" feed. The Basics The mixing board is actually a very simple device.
Treble control adjusts the amount of high frequencies on the particular channel Bass control adjusts the amount of low fequencies on the particular channel Effect control adjusts the amount of effect on the particular channel Reverb On/Off allows you to turn the effect control on or off for each channel PHANTOM POWER allows you to turn on/off phantom power when needed for condenser microphones on CH1 and CH2 HI-Z allows for a hi-impedance signal to be provided for devices on CH3 of the mixer MIC/LINE “SELEC
STEREO OUTPUTS: We've brought signals into the mixer now let's send them somewhere…The EON208P has Left and Right ¼" outputs: 1. LEFT/RIGHT speaker outputs These outputs should only be connected to the EON208P speakers and under no condition should they be connected to the input of another electronic device. These outputs carry power and as such could damage the electronic device. Only use "unshielded" speaker cables (like the cables provided with your EON208P). 2.
Section 5: System Specifications EON208P Main Features Proven JBL sound quality Bluetooth® streaming audio Ergonomic design with internal cable storage System Amplifier Mixer System Type: Portable 2-way full-range loudspeakers with powered mixer Maximum SPL Output: 121 dB peak AC input : 100-120 V, 220-240 V 50/60 Hz Design: Class D System Power Rating: 300 W (2x 150 W stereo) Output Connector: 2 x 1/4" TS (unbalanced) amplifier outputs Channels: 1-4: XLR/1/4" jack combo connectors; 5-6:
Section 6: Cables and Connectors XLR/F to XLR/M Microphone Cable The standard cable for interconnection of microphone and line level signal in professional audio systems. • Microphone to mixer TRS (balanced) 1/4 inch phone jack to XLR/M For connecting balanced devices with 1/4 inch phone and maybe used interchangeably. TRS (unbalanced) 1/4 inch phone jack to XLR/M For connections of instruments with unbalanced outputs to balanced XLR inputs.
Section 7: Contact Information Mailing Address: JBL Professional 8500 Balboa Blvd. Northridge, CA 91329 Shipping Address: JBL Professional 8500 Balboa Blvd., Dock 15 Northridge, CA 91329 (Do not return product to this address without first obtaining prior authorization from JBL) Customer Service: Monday through Friday 8:00am - 5:00pm Pacific Coast Time in the U.S.A. (800) 8JBLPRO (800.852.5776) www.jblproservice.com On The World Wide Web: www.jblpro.
Section 8: Warranty Information The JBL Limited Warranty on professional loudspeaker products (except for enclosures) remains in effect for five years from the date of the first consumer purchase. JBL amplifiers are warranted for three years from the date of original purchase. Enclosures and all other JBL products are warranted for two years from the date of original purchase. Who Is Protected by This Warranty? Your JBL Warranty protects the original owner and all subsequent owners so long as: A.
Part Number: 5001426
