Technical Manual
705P
5” Bi-Amplified Master Reference Monitor
SYSTEM INTEGRATION 6 SPECIFICATIONS 6
FEATURES 6
ORDER SPECIFICATIONS 6
• Integrated amplification and digital
signal processing (DSP) room EQ
• JBL 7 Series and JBL M2 Master Reference
Monitors can be combined for multi-
channel systems in any size room
• Compact enclosures and mounting points allow
versatile mounting options and unobstructed sight lines
• HARMAN HiQnet™ port enables feature
updates as they become available
• Also available: JBL 7 Series installe models and
the JBL Intonato 24 Monitor Management Tuning
System for complete scalable monitoring solutions
in multi-channel and immersive applications
LF DRIVER SIZE: 127mm (5”)
LF DRIVER TYPE: JBL725G
HF DRIVER SIZE: 25mm (1”)
HF DRIVER TYPE: JBL 2409H Compression Driver
CROSSOVER: 1750 Hz
POWER CONFIGURATION: Bi-Amplified
HF DRIVER POWER AMP: 250W Class D
LF DRIVER POWER AMP: 250W Class D
FREQUENCY RESPONSE +/-3 dB: 45Hz-25kHz
LF FREQUENCY EXTENSION (-10dB): 39Hz
MAXIMUM CONTINUOUS SPL*: 101 dB
MAXIMUM PEAK SPL*: 107 dB
MAXIMUM PEAK INPUT LEVEL: -10 dBV / +4 dBu
ELECTRICAL DISTORTION CRITERIA: 0.1%THD @ 1kHz/2.83VRMS output;
<0.5% THD @ 1kHz, Full rated output
SIGNAL TO NOISE RATION, HF: 92dBA (A-Weighted), 83dBr (unweighted),
relative to 2.83VRMS output on HF
SIGNAL TO NOISE RATIO, LF: 85dBA (A-Weighted), 80dBr (unweighted),
relative to 2.83VRMS output on LF
ANALOG INPUT TYPE: 1 x XLR, Female Balanced
DIGITAL INPUT TYPE: 1 x XLR, Female Balanced
DIGITAL INPUT FORMAT: AES3
DIGITAL PASS THROUGH: 1 x XLR, Male
ACCEPTABLE DIGITAL AUDIO
SAMPLE RATES +/- 1%: 44.1 kHz, 48 kHz, 88.2 kHz,
176.4 kHz, 192 kHz
ROOM EQUALIZATION: 8 parametric filters
USER EQUALIZATION: 4 parametric filters, plus HF Shelf, LF Shelf
ROOM DELAY: 18ms
FRAME (A/V) DELAY: 150ms
A/D, D/A CONVERTER: 24 bit / 192 kHz A/D, 32 bit / 192 kHz D/A
INTERNAL PROCESSING: 32 bit Floating Point. 192 kHz Sample Rate
NETWORK INTERFACE: Harman HiQnet™ RJ45 Connector
AC INPUT VOLTAGE: 100-240VAC 50/60Hz +/-10%
ENCLOSURE TYPE: Ported with patented
JBL SlipStream™ port tube
CONSTRUCTION: 9 mm Birch Plywood
H x W x D mm (Inches): 268 x 151 x 274 (10.56 x 5.94 x 10.80)
WEIGHT: 5.68 kg (12.5 lbs.)
SHIPPING CARTON (H x W x D): 394 x 254 x 375 mm (15.5 x 10 x 14.25 in.)
SHIPPING WEIGHT: 8.01 kg (17.67 lbs.)
BOX DIMS (L X W X H): 14 in x 9.5 in x 16.9 in
SHIPPING WEIGHT: 17.6 lbs
UPC CODE: 691991006326
• JBL 725G low-frequency transducer
delivers low-distortion and high SPL
• JBL 2409H high-frequency transducer
with low-mass annular diaphragm
• JBL patented Image Control Waveguide
• 2-channel Class-D amplifier
• 192 kHz, 32-bit floating point processing
• 8 Room EQ and 6 User EQ filters
• 6 factory presets, 6 user-defined presets
• 18 milliseconds of Room Delay, 150
milliseconds of AV Sync Delay
• 1 x XLR balanced analog audio input
• 1 x XLR AES3 format digital input with
1 x XLR pass-through output
• Digital input accepts sample rates of up to 192 kHz
• RJ-45 network connection for
Harman HiQnet connectivity
• Rear-panel multi-function controls and LCD display
allow selection of Input Sensitivity, Input Trim, Room
EQ, User EQ, Room Delay, AV Sync Delay
• Top and bottom mounting points; birch plywood
cabinets reinforced for safe mounting
• Protective steel grilles
www.jblpro.com
© 2017 HARMAN International Industries, Incorporated. All rights reserved.
JBL Professional 8500 Balboa Blvd. Northridge, CA 91329 USA


