Data Sheet

2226G/H/T 380 mm (15 in) Low Frequency Transducer
Increased power handling also requires greater
mechanical integrity. A new cone design greatly improves
cone strength and stiffness-to-weight ratio through the
use of a new glass fiber/paper composite cone material.
A new surround topology and edge damping treatment
allow greater linear excursion for matched power and
displacement levels. The voice coil benefits from a new
winding technique which offers greater power handling
and thermal stability. All design aspects of the surround,
cone and voice coil have been carefully optimized and
controlled to provide smooth and extended high
frequency response.
The 2226G/H/J can directly retrofit the 2225H/J trans-
ducer without enclosure re-tuning while providing up to
4 dB more acoustic output with lower levels of distortion.
The high power handling and robust construction of
the 2226G/H/J make it a natural for tour sound and fixed
sound reinforcement use, while the low distortion and
smooth response make it an ideal choice for critical high
level monitoring applications.
THIELE/SMALL PARAMETERS
6
:
f.: 40 Hz
R
e
: 2.5 ohms (G), 5.0 ohms (H),
10.0 ohms (J)
V
as
: 175 1 (6.2 ft
3
)
S
d
: 0.088 m
2
(137 in
2
)
X
max
: 7.6 mm (0.30 in)
V
d
: 689 cm
3
(41 ins)
L
e
: 0.92 mH (G), 1.75 mH (H),
rk, (Half space)
2
: 3.3%
P
e
(Max)
1
600 W continuous pink noise
MOUNTING INFORMATION:
Overall Diameter: 388 mm (15 17/64 in)
Bolt Circle Diameter: 370 mm (14 9/16 in)
Baffle Cutout Diameter
Front Mount: 355 mm (14 in)
Rear Mount: 359 mm (14 9/64 in)
Depth
7
: 137 mm (5½ in)
Volume Displaced by Driver: 6 1 (0.2 ft
3
)
Net Weight: 8.7 kg (19¼ lb)
Shipping Weight: 10.2 kg (22% lb)
6
Thiele/Small parameters are measured after 2 hour exercise period using a 600 W AES
power test and will reflect the expected long term parameter values once the driver has
been installed and operated for a short period of time.
7
Clearance of at least 76 mm (3 in) must be provided behind the magnet assembly and
the gap vents to allow sufficient air circulation and proper cooling to take place.
Typical Response and Impedance Curves, Enclosure
Volume and Port Tuning
FREQUENCY IN Hz
Frequency response contour of the 2226H taken in a hemispherical free-
field environment, a closed box of 280 1 (10 ft
3
) internal volume
enclosing the rear of the driver. Measured response of a typical produc-
tion unit, including all peaks and dips, does not deviate more than 2 dB
from the above curve. The dotted line represents measured 45 degree
off-axis response. The dashed curve represents the response when the
driver is mounted in a 140 1(5 ft
3
) vented enclosure tuned to 40 Hz. The
impedance magnitude curve is measured in free-air.
Distortion vs. Frequency
Distortion levels raised 20 dB, measured at 60 watts, 1 meter.
JBL Professional
8500 Balboa Boulevard, PO. Box 2200
Northridge, California 91329 U.S.A.
H A Harman International Company
SS 2226G/H/J
CRP 5M
2/97