L75ms Integrated Music System Owners Manual ©2022 Harman International Industries, Incorporated Features, Specifications, and Appearance subject to change without notice.
IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Clean only with a dry cloth. Do not block any ventilation openings. Install this apparatus in accordance with the manufacturer’s instructions. 7. Do not install this apparatus near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat. 8.
Table of Contents IMPORTANT SAFETY INSTRUCTIONS ...................................................................................................... 2 Product Overview ....................................................................................................................................... 4 Basic Wiring Diagram ................................................................................................................................ 4 What’s in the Box ..................................
Product Overview The L75ms supports a variety of sources from wireless streaming via Bluetooth and Wi-Fi to hard wired sources such as a phono turntable or TV. While some connections are specific, others can be any device that matches that match the connections type. Basic Wiring Diagram What’s in the Box 1x L75ms Integrated Music System 1x Speaker Grille 1x RF Remote 1x Region Specific Power Cord Pg 4 L75ms Owners Manual | Rev1.0 20220201 | JBL.
Rear Panel Connections NOTE: Connections not noted here are for service use only and have no operation for regular use. A Ethernet RJ-45 10/100bit B Reset Resets L75ms to Factory Defaults. Refer to Restoring Factory Defaults for details. C Bass Contour Use to adjust for bas compensation based on nearness to boundaries. Refer to Speaker Placement for details. D Sub Out Single RCA - Connect to Powered Sub with LFE input E Aux In 3.
Top Panel Controls A Source Indicators Indicates connection status. NET – White=Connected | Blinking=Searching | Red=Network Disabled Sources – White=Active | Off=Not Active B Volume Controls Controls output volume of speaker C Source Selection Press to move to the next source. D Volume Indicator Dots illuminate from left to right as volume increases.
Initial Setup Speaker Placement Setting Boundary Compensation The L75ms was designed to be placed on top of a cabinet or table in a open area away from boundaries such as walls or cabinet surfaces. The bass contour switch is used to compensate for placing the speaker on cabinet shelf where side and top areas are close to the speaker. Set the Bass Contour switch located on the rear panel based on the speakers proximity to side boundaries such as walls or the inside of a bookcase or cabinet.
Connecting Sources AUX – Connect using a 3.5mm (1/8”) TRS Stereo female for analog 2ch. Pinout follow standard configuration. Refer to Rear Panel Connections item E. PHONO – Connect the stereo analog output of a turntable and the GND from the turntable to the GND on the L75ms. Note that this input is phono level can is not intended for analog line level outputs. Refer to Rear Panel Connections item F. HDMI-ARC – Connect to the ARC input of a TV.
Wi-Fi Connection with Airplay 1. Navigate to the network settings for your iOS device. 2. Select Wi-Fi and navigate to Setup New Airplay Speaker. 3. Select the device named L75MS-XXXXX. The XXXXXX is the corresponding MAC address. 4. Select the network for the L75ms to use and select Next. 5. Follow the on-screen instructions to complete the setup of the L75ms as an Airplay speaker.
Using the L75ms Wake from Standby The L75ms enters standby mode when the power button is pressed or after 10mins of no signal on a selected source. To wake the L75ms from standby perform one of the following operations. • • • Press any button on the remote or top panel. Connect to the L75ms via a Bluetooth or Wi-Fi Streaming Source.
Automatically Selected Sources Streaming sources and the HDMI-ARC input will automatically be selected when a source is chosen that is connected to the L75ms via cable in the case of HDMI-ARC or Wi-Fi and Bluetooth. Network Streaming The L75ms supports Google Chrome cast which allows the speaker to receive content through a network connection. Casting is done by selecting the cast symbol within the app being used or the connect function of the app.
Specifications Wireless Specification Bluetooth • • • Remote Control Type: BTLE 2402-2480MHz@0.16dBm Bluetooth operation in 2402MHz to 2480MHz with max power 7.67dBm e.i.r.p Bluetooth LE operation in 2402MHz to 2480MHz with max power 9.59dBm e.i.r.p Wi-Fi • • • • Note: 802.11b/g/n operation in 2412MHz to 2472MHz with max power16.96dBm e.i.r.p 5GHz RLAN 802.11a/n/ac: Operation in 5180MHz - 5240MHz; 5260MHz~5320MHz; 5500MHz 5700MHz, with max power: 21.24dBm e.i.r.p 5.
Troubleshooting • HDMI-ARC has No output. • • Ensure that the connected source is set to 2ch PCM Select the ARC input on the TV to re-establish ARC connection. Select another source on the TV or L75ms and then switch back to HDMI. Restoring Factory Defaults The L75ms can be reset to factory defaults should the need to arise. This will erase all settings for Network and Bluetooth requiring that all connections be reconfigured.
Trademarks and Licenses Apple®, AirPlay® and the AirPlay Logo™, iPod®, iPhone® and iPad® are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. AirPlay 2 works with iPhone®, iPad®, and iPod touch® with iOS 11.4 or later, Mac with OS X® Mountain Lion or later, and PC with iTunes® 10.2.2 or later. The Spotify software is subject to third party licenses that can be found here: https://developer.spotify.
Harman International Industries, Incorporated. 8500 Balboa Blvd, Northridge CA 91329 United States. European Representative: Harman International Industries, Incorporated. EMEA Liaison Office, Danzigerkade 16G, 1013 AP Amsterdam, The Netherlands. UK Business Address: Ground Floor, Westside 2, London Road, Apsley, Hemel Hempstead, Hertfordshire, HP3 9TD, United Kingdom. © 2022 Harman International Industries, Incorporated. All Rights Reserved.
