Owner's Manual
Frequency Response (-10 dB): 47 Hz - 16 kHz
Frequency Response (±3 dB): 60Hz - 15 kHz
Power Rating: 240 W Continuous Program (2 hrs)
120W (480W peak), Continuous Pink Noise (2 hrs)
100W (400W peak) Continuous Pink Noise (100 hrs)
Maximum Input Voltage: 28.0 V
Sensitivity: 87 dB, 1W @ 1m (ave. 80Hz - 16kHz)
Nominal Coverage Angle: 360° horizontal, 160° vertical (primary listening 10° to 50° up from ground).
Directivity (Q): 2.1
Directivity Index (DI): 3.2 dB
Rated Maximum SPL : 108 dB @ 1m
Nominal Impedance: 8 (at 8 setting)
Minimum Impedance: 6.6 at 9.5kHz
Transformer Taps: 70V: 60W, 30W, 15W & 7.5W
100V: 60W, 30W, 15W
Insertion Loss: <0.5 dB at any tap setting
ru Setting: 8 nominal
Crossover Type: 2
nd
Order LPF on LF and 2
nd
Order HPF on HF
Recommended Protective High-Pass: 45 Hz for 8 operation, 24 dB/oct
80 Hz for 60W tap, 24 dB/oct
50 Hz for 30W, 7.5W, and 7.5W taps, 24 dB/oct
Transducer:
Low Frequency Driver: 200 mm (8.00 in) diameter LF driver, Kapton™ former, 38mm (1.5 in) voice coil, polypropylene cone and polyurethane surround.
High Frequency: 25mm (1.0 in) diameter HF driver Polyetherimide (PEI) dome.
Physical:
Enclosure Material: LDPE Polyethylene plastic, 6 mm wall thickness, UL94V-0 rated.
Grille: Powder coated stainless steel.
Environmental: IP-56 rating per IEC529 (dust protected and protected against strong jets of water). Exceeds MilSpec 810 for humidity, salt
spray, temperature & UV. Passes Mil-STd-202F for salt spray. Enclosure UL94V0 rated.
Agency Ratings: UL 1480 Speakers for Fire Alarm, Emergency, and Commercial and Professional Use, 5th Edition, for outdoor wet locations; UL
1480A Speakers for Commercial and Professional Use, 1st Edition; CSA C22.2 No. 205-12, Signal Equipment. Transformer UL
Recognized per UL1876, ROHS compliant.
Terminals: Bare wire with dielectric-gel-lled wire nuts (internal to top speaker section)
Wiring: Water ingress protected by two stages of gland nuts, one mounted on outside of enclosure (installed by installer via drilling 22
mm (0.875 in, 7/8 in) hole in any of multiple provided locations) and one between the bottom base and top speaker sections.
Included gland nuts require round-jacketed wire with outside diameter between 4.0 mm and 9.0 mm (0.16” in and 0.35” in). For
Installation instructions, see Installation Guide (#IS-C80MLS).
Colors: Hunter Green, RAL6018
Dimensions (H x W x D): 524 x 355 x 355 mm (20.7 x 14 x 14 in.)
Net Weight: 7.8 kg (17 lb)
Shipping Weight: 10.5 kg (23 lb)
Included Accessories: (2) wire nuts, (2) gland nuts, (1) securtiy screwdriver
Installer-Supplied Required Tools: 22mm (0.875 in, 7/8 in) twist-type drill bit (or other type suitable for plastic) for installing gland nut into enclosure.
SPL Level Variation Within
the Listening Space
Distance Apart
±1.5 dB
4.0 meters (13 feet) apart
±3.0 dB
6.5 meters (21 feet) apart
±4.5 dB
9.0 meters (30 feet) apart
►
CONTROL
BBM
B"
""'fwo-Way
Co-axial
Mushroom
Landscape
Speaker
Specifications:
Frequency Response (-10 dB):
Frequency Response
(±3
dB):
Power Rating•:
Maximum Input Voltage:
Sensitivity
2
:
Nominal Coverage Angle:
Directivity (
Q):
Directivity Index (DI):
Rated Maximum SPL ':
Nominal Impedance:
Minimum Impedance:
Transformer Taps:
Insertion Loss:
Thru Setting:
Crossover Type:
Recommended Protective High-Pass:
Transducer:
Low Frequency Driver:
High
Frequency:
Physical:
Enclosure Material:
Grille:
Environmental:
Agency Ratings:
Terminals:
Wiring:
Colors:
Dimensions
(H
x W x D ):
Net
Weight:
Shipping Weight:
Included Accessories:
Installer-Supplied Required Tools:
47Hz-16kHz
60Hz-15kHz
240 W Continuous Program (2 hrs)
120W
(480W
peak), Continuous Pink Noise
(2
hrs)
100W
(400W
peak) Continuous Pink Noise {100 hrs)
28.0V
87
dB,
IW@
Im
(ave.
80Hz-
16kHz)
360° horizontal, 160° vertical (primary listening 10°
to
50°
up
from ground).
2.1
3.
2dB
108dB@lm
8.0
(at
8.0
setting)
6.
6.0
at 9.SkHz
70V: 60W, 30W,
!SW
&
7.SW
100V:
60W,30W,
!SW
<0.5 dB at any tap setting
8.0
nominal
2••
Order
LPF
on
LF and 2••
Order
HPF
on
HF
45
Hz
for
8.0
operation, 24
dB/oct
80
Hz
for
60W
tap, 24
dB/oct
50
Hz
for 30W, 7.SW, and 7.
SW
taps, 24 dB/
oct
200
mm
(8.00 in) diameter LF driver, Kapton- former, 38mm (1.5 in) voice coil, polypropylene cone and polyurethane surround.
25mm
(1.0 in) diameter
HF
driver Polyetherimide (PEI) dome.
LDPE
Polyethylene plastic, 6
mm
wall thickness, UL94V-0 rated.
Powder coated stainless steel.
IP-56 rating
per
IEC529
(dust protected and protected against strong jets
of
water), Exceeds Mi!Spec 810 for humidity, salt
spray, temperature
&
UV
. Passes Mil-STd-202F for salt spray. Enclosure UL94V0 rated.
UL
1480 Speakers for Fire Alarm, Emergency, and Commercial
and
Professional Use,
5th
Edition, for
outdoor
wet locations;
UL
I
480A
Speakers for Commercial and Professional Use,
!st
Edition;
CSA
C22
.2
No
. 205-12, Signal Equipment. Transformer
UL
Recognized per UL1876,
ROHS
compliant.
Bare wire with dielectric-gel-filled wire nuts (internal
to
top speaker section)
Water ingress protected by two stages
of
gland nuts,
one
mounted
on
outside
of
enclosure ( installed by installer via drilling 22
mm
(0.875 in, 7 /8 in) hole in any
of
multiple provided locations) and
one
between the
bottom
base and top speaker sections.
Included gland nuts require round-jacketed wire with outside diameter between 4.0
mm
and 9.0
mm
(0.16" in and 0.35" in). For
Installation instructions, see Installation Guide (#IS-C80MLS).
Hunter
Green, RAL6018
524x
355 x 355
mm
(20.7 x
14x
14in
.)
7.8kg(l7lb)
10.5 kg (23 lb)
( 2) wire nuts, ( 2) gland nuts,
(I)
securtiy screwdriver
22mm
(0.875 in, 7
/8
in) twist-type drill bit {or
other
type suitable for plastic) for installing gland
nut
into enclosure.
1
Continuous
Pi
nk
Noise
rating
is
I
EC-shaped
pin
k
noise
with
a 6
dB
crest
f
aclor.
Continuous
program
power
is
defined
as
3
dB
above
the
Continuous
Pink
Noise
Rating.
In
8
ohm
mode.
SPL
Level
Varation
Chart
by
Layout
Spacing
2
Haff
-
space,
2n
l
oading
(in
-
ground
recessed),
360°
honzontal,
ver1ical
averaged
1
Oto
50
degrees
from
ground.
3
8
ohm
mode,
calculated
from
sensitivity
and
power
handling,
exclusive
of
power
compression.
JBL
continually
engages
in
research
related
to
product
im
provemen
t.
Some
matenals,
production
methods
and
design
refinements
are
in
tro
duoed
into
existing
products
1'.1thout
notioe
as
a
routine
express
i
on
of
th
at
philosophy
.
For
th
is
reason,
any
current
J
BL
product
may
d
iffer
in
some
respect
from
its
publlshed
descnption,
but
"111
at.vays
equal
or
exoeed
the
origina
l
design
sp
ecilcalons
unless
otherwise
stated.
SPL
Level
Variation
Within
the
Listening
Space
±1.SdB
±3.0dB
±4.5
dB
At
listening height
of
1.5
meters
(5
feet)
Distance
Apart
4.0
meters
(13
feet)
apart
6.5
meters
(21
feet)
apart
9.0
meters
(30
feet)
apart
II
.
14-J-i#ii1Hff
ii
~
HARMAN